Lets see some pics of your tactical shottys!

Here is my "no frills" Wingmaster Magnum with Remington 14 inch barrel.
DSC_0062_zps652b16ec.jpg
[/URL][/IMG]
DSC_0061_zps385826b2.jpg
[/URL][/IMG]
 
Jack Brock said:
The mag tube has since been sold as it was pluged with epoxy and usless to make the firearm compliance within the law, this is how it looks now with the standard mag tube, I think that installing the rail and sights make the whole 930 more practical and now would call it a true Home Defence shotgun.


When I had this done I searched everywhere in Canada for a SPX 930 and could not find one so went ahead with this rendition of it. The firearms name is Chopper!
Click to expand...

Nice
 
here is my remington 870 build i finished this afternoon

started as a stock reminton 870 tactical magnum
cerakoted desert tan
timney trigger fix (new sear and sear spring)
polished up the sear and hammer trigger breaks at a smooth 2 lbs
S&J hardware no jam follower
S&J hardware jumbo safety
MagPul SGA stock
MagPul SGA single point sling mount
pump from a remington 870 police
Mesa Tactical side saddel with 20'' rail

photo1_zps91cd4266.jpg


photo2_zpsb73f8d54.jpg


photo3_zpsedb4a506.jpg


photo4_zps4a853b6e.jpg
 
Here's my Mossberg 500 Thunder Ranch.
Magpul SGA stock
Magpul MOE forend
Magpul SGA sling adapter
Mesa Tactical 6 shot side saddle
Now I just need a MS3 sling and a red dot. Leaning towards the trs25

nycLUeP.jpg
 
Greenhorse six said:
^^^ Nice set up , You should have a look at GG&G foreward sling loop for the 500 and maybe a magpul QD socket for your SGA , something like this.lol
Click to expand...

I was looking at getting the magpul forward sling mount, but i decided to hold off for now. What is the advantage of the QD socket over the SGA sling adapter?
 
mister308 said:
I was looking at getting the magpul forward sling mount, but i decided to hold off for now. What is the advantage of the QD socket over the SGA sling adapter?
Click to expand...

Well , these are just my thoughts on this and YMMV , On a 20" barreled shotgun with a full length mag tube I'd run a magpul barrel clamp and I do on a 20" 590 , on a 18.5" like yours and mine, I like to keep it a little cleaner and stream lined , so a sling plate under the mag cap / screw.

And about the QD sling point over the receiver sling mount, I like to have my rear sling points as far back as I can , again , it's just me, it's cleaner , doesn't get in the way , and that's from using a receiver sling plate on a normal stock and shooting off handed ,it sits right about where I want to put hand , however, it's looks like it wouldn't be a problem with the SGA stock though.


And get the magpul MS1 sling and what ever hardware to run it like you want ,it's a very flexable system.
 
Almost complete.

Need a sling, front mount, little dab of paint to match the surefire light to the rest, maybe the full vang comp system treatment.

 
Greenhorse six said:
Well , these are just my thoughts on this and YMMV , On a 20" barreled shotgun with a full length mag tube I'd run a magpul barrel clamp and I do on a 20" 590 , on a 18.5" like yours and mine, I like to keep it a little cleaner and stream lined , so a sling plate under the mag cap / screw.

And about the QD sling point over the receiver sling mount, I like to have my rear sling points as far back as I can , again , it's just me, it's cleaner , doesn't get in the way , and that's from using a receiver sling plate on a normal stock and shooting off handed ,it sits right about where I want to put hand , however, it's looks like it wouldn't be a problem with the SGA stock though.


And get the magpul MS1 sling and what ever hardware to run it like you want ,it's a very flexable system.
Click to expand...

thanks for the advice. think im gunna get the GG&G sling plate and an ms3 sling with my next order. anyone have a red-dot that they would like to donate to the mister308 shotgun build?

No?

Worth a try
 
I'm a firm believer in the K.I.S.S way of doing things. This is 1951 produced 870 Wingmaster with a late 70's 20" rifle sight barrel and 3 shot mag tube extension. The original stock was replaced with a non-checkered Trap version so I can get proper cheek weld and a longer LOP for consistent sight alignment everytime the gun is shouldered. The buttpad corners have been radiused so they don't grab any clothing. The trigger has been upgraded with a Timney trigger kit.

ohik5s.jpg
 
Last edited:
Canadiankeeper said:
Hows that angled grip work ? Where did you get rails for bottom of forend?
Click to expand...

you can buy magpul rails in different lengths that can be fitted onto the MOE forend. You just have to install them before you install the actual MOE if im not mistaken. And the AFG does give you a solid grip on the pump (even better with a handstop on the side-rail), but I found that the front lip smacks into your index finger. Not bad for a little bit, but after continuous shooting it can get pretty painful.
 
VLT79 said:
I'm a firm believer in the K.I.S.S way of doing things. This is 1951 produced 870 Wingmaster with a late 70's 20" rifle sight barrel and 3 shot mag tube extension. The original stock was replaced with a non-checkered Trap version so I can get proper check weld and a longer LOP for consistent sight alignment everytime the gun is shouldered. The buttpad corners have been radiused so they don't grab any clothing. The trigger has been upgraded with a Timney trigger kit.

ohik5s.jpg
Click to expand...

That's a slick looking setup... Subtle, but every bit of work put into it to a purpose.
 
You must log in or register to reply here.
Back
Top Bottom