Leupold (knockoffs) Customers ????

[pilgrim]

thanks, Barney......

 

[mdbuckle]

I followed Hungry's lead and bought 2 also...

Everyone saw it in the gun club said WoW!

Everyone looked into the lenses said WoW! WoW!

Everyone Heard the price I got them said WoW! WoW! WoW!

Exactly the reaction I got!

 

[damadama]

I just ordered a MK4 LR/T. Does anyone have any knowledge of these?? They are selling on Ebay for $65.99 US

-Features:
-Matte Black finish
-1/8-MOA 'click' windage and elevation adjustments with 7-MOA of adjustment
for each revolution
-Fully multicoated lenses for unsurpassed light transmission/contrast
-Illuminated TMR (Tactical Milling Reticle) reticle (5 Green brightness level)
(5 Red brightness level) -Nitrogen filled
-100% Waterproof/Fogproof/Shockproof
-1 x Extersion Tube included
-1 x Lens Cover included
-2 x 20mm Weaver high mounts included


-Specificaton:
-0 to 5 intensity RED & GREEN
-Actual Magnification: 6x to 24x
-Length 39cm
-Objective Diameter: 50mm
-Eyepiece Diameter(in): 30mm
-Weight: 641 grams

 

[WWIII]

I just ordered a MK4 LR/T. Does anyone have any knowledge of these?? They are selling on Ebay for $65.99 US

-Features:
-Matte Black finish
-1/8-MOA 'click' windage and elevation adjustments with 7-MOA of adjustment
for each revolution
-Fully multicoated lenses for unsurpassed light transmission/contrast
-Illuminated TMR (Tactical Milling Reticle) reticle (5 Green brightness level)
(5 Red brightness level) -Nitrogen filled
-100% Waterproof/Fogproof/Shockproof
-1 x Extersion Tube included
-1 x Lens Cover included
-2 x 20mm Weaver high mounts included


-Specificaton:
-0 to 5 intensity RED & GREEN
-Actual Magnification: 6x to 24x
-Length 39cm
-Objective Diameter: 50mm
-Eyepiece Diameter(in): 30mm
-Weight: 641 grams

If its a leupold knockoff why does it have Tasco written on the front bell?

 

[prosper]

Why bother making a knock-off Tasco, anyway? Why not at least make a knockoff of a good scope?

 

[buckbrush]

no side focus?

 

[popcan]

I decided to try one of these, just for the heck of it for the price... I find that bottomed out, I cannot zero the crosshairs on target at 100 yds.... it is way high and I can't dial down any further. Is there a way to adjust the reticle crosshairs to zero at 100?

 

[P of PDent]

If your scope is bottoming out at 100 yds (can't adjust it to hit lower on the target) then you neen to place thin shims under the front base to raise up the front of your scope.