M&P, P226, or CZ75/85 or SP01

mbhabsfan

New member
EE Expired
Rating - 0%
0   0   0
any thoughts on a first pistol for IPSC? I know all about handsize etc. I am just wondering what experienced IPSC people could recommend for a starter weapon. I am looking to take the black badge course in the next little while and am not sure where to start as far as handgun choice.
 
if you'll go with a CZ, get an SP01 - why get an older design then a newer, slightly improved one is the same price.

What puts the SP01 ahead of any of its competition as far as IPSC competition shooting goes is the HUGE list of production division legal "factory" parts which allow you to greatly modify ("improve") both the SA and DA trigger pulls, trigger reset, etc, as well as things like lighter recoil springs, and a great set of sights (both front and rear).

Also, the SP01 is incredibly accurate, more so than any other Prod gun I've tried (I've never shot the M&P, but I owned a 226).

Plus it's cheaper than the Sig (again, don't know about the M&P).
 
mbhabsfan said:
why the SP01 over the 85? the 85 has adjustable sights vs non with the sp01 I think.

only the "85Combat" has adjustable sights out of the box, and who cares, since if you really like those, you can just put them on your SP01.

The recoil characteristics of the SP01 are faaaaaaaaar superior to any other CZ pistols of that style.
 
Yea, what Omen said. The CZSPO1 is the way to go. For a cz knockoff the Baby Eagles are pretty sweet too. Great trigger out of the box and the full lenght dustcover really keeps the muzzle down as well.

Dave
 
SP01. It's been noted here in OZ that a lot of top production shooters are buying the CZ. The guy who won the Victorian state titles with a Glock last week bought a CZ at the end of the match.

Extra weight, accuracy, good sights, good grip angle and good trigger make for a winning package.

If you are unsure about the decocking on a loaded chamber thing, then you can get the tactical model with a decocker instead of as safety.
 
As stated, you can tune the CZs via a loophole in the rules. I have a tuned up 85 combat that shoots as well as another tuned up SP01 I'm familar with,
shooting them side by side, you can tell the recoil is different, but I would say just the better part of marginal. I have other service pistols that shoot as accurately as well.

I think CZ is a good option, but don't think the SP01 is the be-all. Competitors that shoot them well are good shooters to begin with.

I seriously doubt you can get cheaper overall than a Glock 17, doubly so if you are mil/leo and get it through police ordance.
 
The SP01 is way more accurate than I expected. I just picked one up for my girlfrriend for production. Way better than the M&P just on the trigger alone.
Anyone remember the Sigma trigger?
 
beltfed said:
I seriously doubt you can get cheaper overall than a Glock 17, doubly so if you are mil/leo and get it through police ordance.

Glocks are good guns but not to everyone's taste. The grip angle and palm swell on them is very different from CZ's, and they will recoil harder simply because they have less weight. Additionally, in Production the Glock trigger will be constantly over five pounds, whereas, with the SP01 properly set up the first pull will be a very smooth seven-ish pounds and then it goes to what, two pounds? (Omen, what's yours breaking at?) That's a pretty big advantage. They are also more accurate than Glocks.

I've shot Omen's SP01 and trust me; it's a sweet ride.
 
If you want one gun to use in both IPSC and IDPA then rule out the SPO1 as it is not legal in IDPA due to the dust cover. Just a thought if you have interest in both shooting sports. For everyone but the top shooters the difference between a SPO1 and a CZ 85 would be insignificant. Personally I went with the Tanfoglio "L" model as I wanted to use the same gun in both sports. The Tan has a slightly longer barrel than my CZ 85. Both are sweet guns. I now also have the Conversion kit for the Tan in .40Cal and may use it in Limited.


Take Care

Bob
 
I had the chance to shoot the Tan in .40 at Club de Tir in Montreal, it was wonderful to shoot but had some jam issues where it would not extract.
 
mbhabsfan said:
so most people aren't commenting on the P226, rule it out as ipsc??

no, not at all, the Canadian Lady prod champion used it for a whole year... It is a very reliable gun, and honestly, if I ever had to carry one for self-defence, I'd go with a SA/DA P226 - no question. BUT in competition, the SP01 has the advantage, because of all the aforementioned reasons.


Canuck44 said:
For everyone but the top shooters the difference between a SPO1 and a CZ 85 would be insignificant.

Sorry, disagree. The huge difference in accuracy of the SP01 makes a difference for everyone, and almost everyone who's shot the sp01 and the 85combat side by side at my club was amazed how quickly and easily the sp01 came back on target after each shot.

Will switching to an sp01 from an 85combat jump you up a class? Of course not, but it's also not true that you won't see any differences/improvements in the performance and handling...

I've shot IPSC with the 75BD, the 85Combat, and now the SP01 - you can tell the difference, and you don't have to be a top shooter...
 
If you want one gun to use in both IPSC and IDPA then rule out the SPO1 as it is not legal in IDPA due to the dust cover.

Actually it's the weight. If you get the weight down under 39 oz. you can use it in SSP.
The rules for ESP state
Pistols approved for SSP may be used in in ESP and CDP depending upon calibre, even if the pistol in question has a ful length dust cover.

And from Appendix One - Equipment , Section A - Firearms Sub-section 1 - Non-IDPA-Legal Modifications for all Divisions :
Guns that come with light rails straight from the factory may be used in IDPA competition AS LONG AS the gun meets all Division criteria.Howevere, the light itself may not be used on the gun.

You cannot ADD a full length dust cover , but as SSP makes NO reference to dust covers at all , merely overall weight of the gun and magazine, SP01 is legal in SSP if you legally get the weight down.

Go to http://www.czshooters.com/modules.php?name=Forums&file=viewtopic&t=1310
 
dinsdale said:
SP01 is legal in SSP if you legally get the weight down.

According to the CZ-USA website, the SP-01 weighs 2.6 lbs (or 41.6 oz). The max weight in SSP is 39 oz. (Incl empty mag) Further, no external modifications (except sights & grips) are not allowed. Good luck shaving off 2.6 oz of weight internally.
 
mbhabsfan said:
so most people aren't commenting on the P226, rule it out as ipsc??


If you're going to shoot a P226 in IPSC, the P226 X-Five Allround is the way to go.

226X5allround_left.jpg
 
Dragoon said:
According to the CZ-USA website, the SP-01 weighs 2.6 lbs (or 41.6 oz). The max weight in SSP is 39 oz. (Incl empty mag) Further, no external modifications (except sights & grips) are not allowed. Good luck shaving off 2.6 oz of weight internally.

No luck needed.
As indicated above, go to :
Go to http://www.czshooters.com/modules.php?name=Forums&file=viewtopic&t=1310

Guy gets his down to 38.85 oz

I took a current model 3 slot SP-01 DA/SA and did these things:
1. Replace the stock rubber grips with 75B plastic grips.
2. Replace the slide stop with 75B slide stop.
3. Replace the mainspring plug with a 75B mainspring plug.
4. Replace the flat wound recoil spring with a 75B wire wound spring. You can also use a Wolff spring.
5. Do not use the SP-01 magazine, use the older style 16rd 75B mags with the detents in the bottom of the tube.

SP01onScalewMagOut1.jpg
 
Back
Top Bottom