Maccabee Defense SLR information and updates

Please save me reading through 51 pages and possibly other threads ...

So this NR Maccabee receiver set takes ALL AR parts ? As in every pin, every spring, every single last part (short of the stripped upper/lower receivers) ???
 
madashell said:
Please save me reading through 51 pages and possibly other threads ...

So this NR Maccabee receiver set takes ALL AR parts ? As in every pin, every spring, every single last part (short of the stripped upper/lower receivers) ???
Click to expand...

From what has been said, yes except the trigger group is self contained so only certain ones will work.
 
madashell said:
Please save me reading through 51 pages and possibly other threads ...

So this NR Maccabee receiver set takes ALL AR parts ? As in every pin, every spring, every single last part (short of the stripped upper/lower receivers) ???
Click to expand...

We started a locked thread here so people did't have to wade through 51 pages: https://www.canadiangunnutz.com/forum/showthread.php/1641027-Maccabee-Defense-SLR-Info-site

All "standard" AR parts interchange. The only "standard" parts that might not fit are the trigger pins as some are over long and the MDI design requires that they be at the minimum side of length tolerances. They are easy to file shorter, but MDI will also be offering SS pins designed specifically for their setup.

Some after market "improved" parts may not fit or may not fit without alteration. This would include ambi controls, trigger packs, free float tubes etc particularly where the external dimensions of the receiver sets are critical to fitting them.
 
Thank you. That helped a lot.

Shooting Centre said:
We started a locked thread here so people did't have to wade through 51 pages: https://www.canadiangunnutz.com/forum/showthread.php/1641027-Maccabee-Defense-SLR-Info-site

All "standard" AR parts interchange. The only "standard" parts that might not fit are the trigger pins as some are over long and the MDI design requires that they be at the minimum side of length tolerances. They are easy to file shorter, but MDI will also be offering SS pins designed specifically for their setup.

Some after market "improved" parts may not fit or may not fit without alteration. This would include ambi controls, trigger packs, free float tubes etc particularly where the external dimensions of the receiver sets are critical to fitting them.
Click to expand...
 
I’m a bit confused......is the slr the same as the 102 only it accepts all ar15 parts and the 1o2 uses ar10 parts.
What are the fundamental differences between the 2 rifles and what makes them NR.
 
They are 2 rifle designs made my 2 different company’s. Kinda like asking what the difference between an XCR and a SCAR. They similar in operation, but that’s about it.
 
Interesting to see who has product on retailers shelves first, Maccabee, ATRS or BCL. Might even be someone else.

Demand will be high, so hopefully someone capable of high volume production steps up so they are on retailers shelves rather than just presales and long order waits with no fixed delivery times
 
I find it rich that some of the people sitting here moping about this are some of the same people that had no problem droping 4 figures on a bent chinese stamped steel pos...

Where was any of this outrage over the tavor? You know the rifle that had to be cheaper than the m4/m16 as a part of its program. The same one that costs 1600 in the us and costs 2500 here...

How much is an xcr again? What about a swiss?

For all intents and purposes you are getting a non restricted ar. One to build completely to your specs. You want bargain basement, go budget brands and you have an nr ar for less than 2 grand... also less than pretty much every single one of the aforementioned nr rifles. And for not a hell of a lot more you can put together a solid almost milspec ar for comparable prices to the other nr rifles out there.

As for the hunting crowd, you can put together a wicked lightweight setup for less than the cost of custom bolt guns.
 
r34skyline said:
I find it rich that some of the people sitting here moping about this are some of the same people that had no problem droping 4 figures on a bent chinese stamped steel pos...

Where was any of this outrage over the tavor? You know the rifle that had to be cheaper than the m4/m16 as a part of its program. The same one that costs 1600 in the us and costs 2500 here...

How much is an xcr again? What about a swiss?

For all intents and purposes you are getting a non restricted ar. One to build completely to your specs. You want bargain basement, go budget brands and you have an nr ar for less than 2 grand... also less than pretty much every single one of the aforementioned nr rifles. And for not a hell of a lot more you can put together a solid almost milspec ar for comparable prices to the other nr rifles out there.

As for the hunting crowd, you can put together a wicked lightweight setup for less than the cost of custom bolt guns.
Click to expand...

What he said!
Made in Canada, got to be worth a little extra. These guys took a chance doing this.
I'm in
 
1340 said:
What he said!
Made in Canada, got to be worth a little extra. These guys took a chance doing this.
I'm in
Click to expand...

its not the fact that it "got to be worth a little extra", the facts are that scale of economy of the canadian gn market and the low number of volumes produced require a higher investment by the manufacturer.... anyone that thinks they are being price gouged (specifically the maccabee and the 102) has got to give their head a shake.
 
TinkerBell said:
its not the fact that it "got to be worth a little extra", the facts are that scale of economy of the canadian gn market and the low number of volumes produced require a higher investment by the manufacturer.... anyone that thinks they are being price gouged (specifically the maccabee and the 102) has got to give their head a shake.
Click to expand...

well said thinkerbell

gouging occurs when it is made for the USA market then sold to the Canadian market at over twice the price.

Made in Canada for Canada ONLY will always incur a higher cost
 
r34skyline said:
I find it rich that some of the people sitting here moping about this are some of the same people that had no problem droping 4 figures on a bent chinese stamped steel pos...

Where was any of this outrage over the tavor? You know the rifle that had to be cheaper than the m4/m16 as a part of its program. The same one that costs 1600 in the us and costs 2500 here...

How much is an xcr again? What about a swiss?

For all intents and purposes you are getting a non restricted ar. One to build completely to your specs. You want bargain basement, go budget brands and you have an nr ar for less than 2 grand... also less than pretty much every single one of the aforementioned nr rifles. And for not a hell of a lot more you can put together a solid almost milspec ar for comparable prices to the other nr rifles out there.

As for the hunting crowd, you can put together a wicked lightweight setup for less than the cost of custom bolt guns.
Click to expand...
hopefully you are comparing price gauging to the likes of the tavor and not the quality--cause the 2 arent in the same building--
 
You must log in or register to reply here.
Back
Top Bottom