MRA Renegade Rifles, Parts, and Kits now available

Denka said:
@Maple Ridge Armourer is there a possibility to have that adapter done faster than November for A2 fixed stock? I bit surprised that this came out at the end, was planning to drop PRS stock.
Click to expand...

We are working on it as quickly as possible and we will release it as soon as possible. November was a Conservative estimate.
 
burtass said:
I stubbed my toe today. I want to know MRA is going to do about it. If I had my reciver by the estimated time I would have been at the range and not stubbed my toe. .... not pleased..

Seriously though. It was a presale. It’s all fairly reasonable. Excited to get it when I do.
Click to expand...

Exactly. I don't know folks are complaining this much. It's a pre-sale of a brand new product that had estimated timelines. It's effectively buying you a place in line and a finished product, but not certain on when that's going to happen. Would I be annoyed if it was 6 months behind schedule? You bet. But it's barely a month and that was because the company wanted to ensure best Q&A. Ask yourselves this: would you, the folks who are complaining, prefer being shipped a subpar, out-of-spec product with garbage finish, like what happened with a competitor's product on here like a year or two ago, but on schedule?

Certainly, the receiver not being compatible with an A2 stock out of the box is a whoopsie. But that's really the only major gripe you can have right now.
 
Last edited:
Ramnon said:
Seems as though there was some editing/post removal done to this thread over night...a simple apology would have gone a lot further in my opinion.
Click to expand...

I am moderating posts that do not contribute in a positive way to the conversation including our own posts.

I apologize if you were offended by anything. Despite what anyone might think, my entire team is working diligently everyday to serve the needs of our customers whether those customer buy direct through us or through our dealer network.
 
Fair enough. I do believe you guys are working hard to get orders out, and with the exception of that two word post, I had no issue with how things have been handled.
 
Maple Ridge Armourer said:
I am moderating posts that do not contribute in a positive way to the conversation including our own posts.

I apologize if you were offended by anything. Despite what anyone might think, my entire team is working diligently everyday to serve the needs of our customers whether those customer buy direct through us or through our dealer network.
Click to expand...

Thanks for deleting all my posts. Again, i don't think anyone ever had a problem with the delays but there was definitively a misscommunication where people thought you were shipping to customers on the 15th not dealers (see the previous post about 100 orders). That was the thing that passes a couple of people off, myself included.

Can we at least agree that there was a misunderstanding that lead to some frustration about what was getting shipped when? Again, not anger or frustration about your decision to ship to dealers, but frustration over the miscommunication.

EDIT: I do want to say thank you for the work tour team is doing.
 
Excited to get in on this and have some place for my homeless AR bits and pieces to live, whenever my place in line is called.

Two semi noob questions:

Any thoughts on where to source a .625 gas seal for when the time comes, since the kit comes with a .7*?
Do I need to strip the mag release from my old AR lower as well? I presume it doesn't come with a release preinstalled.
 
Has anyone tried tapping a basic gas block and installing a grub screw or small hex bolt to block the gas?
 
Maple Ridge Armourer said:
Dexter Morgan said:
I know you guys are busy right now.
But possibly in the future you could add this style of charging handle as an option.

I see this style of handle used a lot in UK shooting videos.

Click to expand...


You bet!

We are working on a few different charging handle styles including one similar to this.

The cylinder handle is the most economical to run so it is being included with the kit by default.
Click to expand...

To the MRA Team

With the above in mind, I was wondering if at this time any work on different style charging/bolt handles have been started and if there was an ETA for said?

I appreciate your busy.........

however you have suggested that A-2 fixed stock adapters have an ETA of November 2020, and wondered if you had a similar ETA for the handles

Thanks for making time and I look forward to your response.

respectfully yours

AbH
 
45ACPKING said:
this..... I'm holding out for a large frame model
Click to expand...

To the MRA team

I appreciate that you are all busy turning out receiver sets...........

However if you will indulge me, I am already planning future projects as I go through my parts bin, and I was hoping that you might be able to confirm if there are there still plans for a large frame model (the 308 family of cartridges)?

A ball park ETA would also be appreciated (don't worry I will not hold you to it)

I remember it being discussed, however I seem to be unable to find the specific post and I do not remember the response.

Thanks for your help

regards

AbH
 
littlejackal said:
Excited to get in on this and have some place for my homeless AR bits and pieces to live, whenever my place in line is called.

Two semi noob questions:

Any thoughts on where to source a .625 gas seal for when the time comes, since the kit comes with a .7*?
Do I need to strip the mag release from my old AR lower as well? I presume it doesn't come with a release preinstalled.
Click to expand...

We will have other gas port Seals available soon and yes you will need mag release parts.
 
AbHobbyist said:
To the MRA Team

With the above in mind, I was wondering if at this time any work on different style charging/bolt handles have been started and if there was an ETA for said?

I appreciate your busy.........

however you have suggested that A-2 fixed stock adapters have an ETA of November 2020, and wondered if you had a similar ETA for the handles

Thanks for making time and I look forward to your response.

respectfully yours

AbH
Click to expand...

We are working on this. I want one myself!
 
AbHobbyist said:
To the MRA team

I appreciate that you are all busy turning out receiver sets...........

However if you will indulge me, I am already planning future projects as I go through my parts bin, and I was hoping that you might be able to confirm if there are there still plans for a large frame model (the 308 family of cartridges)?

A ball park ETA would also be appreciated (don't worry I will not hold you to it)

I remember it being discussed, however I seem to be unable to find the specific post and I do not remember the response.

Thanks for your help

regards

AbH
Click to expand...

We expect to start prototyping the 308 in 3 weeks and go into production in November if everything works out well.
 
Maple Ridge Armourer said:
Our dealers placed orders well before we took any web orders. I am delivering half of their orders, then MRA orders, then the final half of the dealer orders. This is as fair a distribution as I could think of.
Click to expand...

Any idea when you will be shipping receiver sets to your customers, True North has stated that they have received 75% of there pre orders and are expecting the rest next week
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom