My Tika T3 lite kicks a lot (30.06) - do I get a muzzle break?

Rating - 100%
21   0   0
I'm not sure what to do - its awesomely accurate and for hunting its perfect, but I really want to put a few hundred rounds down range to get proficient and even with the limb saver I put on, it does kick a fair it. Other than manning up to a bunch of recoil, and in order to make the experience more pleasant (its my only rifle and yes, I'll get others eventually), what should I do? I really want to keep the hot loads that seem to be more accurate.

On that light of a barrel, is it worth it to get a muzzle break that I can spin on and off (just for at the range) or for the cost difference, should I just pay for a heavier barrel (or both?).

- T
 
For the cost of what you'd pay for a thread job and decent muzzle break you might as well just buy a lead sled and then you can use that on any other heavy recoiling guns you might acquire. It might help you with load development too (in case you don't have a shooting stand or whatever)
 
Personally I am not into permanent modifications unless I know I will keep that thing forever... which I rarely do. 30.06 X-Bolt is my only rifle thus far for hunting and target, this round does kick - more so on a gun such as the T3 Lite. I reload my target loads and am currently trying out different hunting loads. Powder and bullet combos can really make a difference in felt recoil - doesn't mean you sacrifice performance though.
 
before getting a brake trade it for a 270. the noise difference isn't worth it for hunting. try a a shoulder pad by past. i can shoot boomers for a lot of rounds with a shoulder pad on without bruising too.
 
X2 on the lead sled. Huge difference. I wouldn't recommend a muzzle brake at all. I've had them before and they're so friggin' loud, it's not funny.
 
I dont understand. However heres a few different things to consider:

What grain of bullets are you using to practise with? id suggest starting out with lighter loads like 150gr, then go up to 165 get used to that and then 180s. Also having the same rifle myself, i find it not that bad for recoil. I put the limbsaver on before ever shooting it.

You have to remember its a 'lite' rifle. Made lite to be easy to pack around in bush. In actual hunting situations, with adrenaline going through the veins, you dont feel recoil anyways.

I wouldnt get the muzzle brake, they lead to def angry hunting partners and guides that want big big tips:p
 
Uh wow. First of all, the noise maker will change your impact, and has in every case that I have seen. So sight in with it to practice and re-sighting in to hunt would perturb me.
And lead sleds are not for practice, they are for sighting in. Practice involves on your feet, knees and prone where a lead sled isn't going to help.
I would get a PAST pad or trade into a .270 or a 7mm-08.
 
I had a tikka t3 lite in 30-06, had a brake installed before I brought it home. Very light,Very accurate with the 168 A-max I loaded for it.That being said,I sold it and will never have another light ,breaked rifle. It was so obnoxiously loud that I had to double up on hearing protection and there was no way I would take it hunting unless I was alone.Did it tame the recoil? Yes,very much so. I chalked that purchase up to experience,I hate a brake and I prefer a bit of heft to my rifles
 
I'm opposed to the use of muzzle brakes on normal hunting rifles. The problem with the lead sled is that you can only use it when shooting at the bench, so it works, but isn't a very versatile.

Recoil management comes down to your physical ability, your mental toughness, and your desire to master a particular firearm. These things are designed to be used by normal people, it will just take a little time to reach your comfort level with it. Whatever you do, don't force yourself to continue to shoot if the rifle hurts you, and if possible, never allow that rifle to hurt you. When you feel discomfort, stop and give yourself some time before shooting again, or reduce the load before you shoot again. The higher your position, the less you'll feel the recoil, consider the difference between off hand and prone, yet shooting a .30/06 prone should not be beyond the comfort level of a physically active individual, but that doesn't mean you have to lie there and fire 100 rounds either. You'll know when its time to stop.

Gun fit is the most often over looked element of recoil management, and it is probably the most important. Most factory rifles have a LOP that is too long, and a thick recoil pad only makes things worse, if the stock is not first shortened. Placement of the scope relative to the LOP is critically important, you won't shoot well if you're scared of being hit with the scope.

The next important consideration is your technique. If you hold the rifle incorrectly, it will pound you. Lets consider off hand for a moment. If you take a boxer's stance, bend the knee of your forward leg slightly and put your weight on it, provided the rifle is placed and held firmly in the pocket of the shoulder, the recoil will move across your chest and down your other leg. Thus the position is not only manageable, but you have the control necessary to make fast repeat shots. But if you attempt to have even weight on both feet, with your feet placed close together and a light hold on the rifle, it will not only pound you, but will knock you off balance as well. Don't anticipate the recoil. If you concentrate on the fundamentals of good marksmanship, there isn't any opportunity to think about recoil, you'll be too busy.

When you said that you preferred to stick with the hotter loads as they were more accurate, I assume from that you handload. Choose a lighter bullet and slow it down. Don't worry so much about the accuracy when you're shooting from field positions, the rifle will still out-shoot you. The load I start novices with is a 125-130 gr bullet at 2600 fps. This is gentler than the Remington Managed Recoil load in both recoil and blast. Once you've achieved a comfort level with that load, speed it up gradually until you've reached the maximum load. One you've conquered the full power light bullets, increase bullet weight, and again drop the velocity a bit, but not as much this time. The original military .30/06 load was a 150 gr bullet at 2700 fps. This is well below the potential for that bullet weight, and you should be able to gain confidence fairly quickly with it. That conquered, you can choose to go to a 165 gr gr bullet or step up to a 180. Some folks choose never shoot bullets heavier than these in a .30/06, but with maximum loads in these bullet weights, you'll probably notice when your rifle goes off, but it's effect on you should be invigorating rather than intimidating.
 
Last edited:
For light recoiling loads I load up some h4895(43.5gr) and a 150gr hornady set. They shoot right around an inch for me as well. It is very light recoiling also. And as an added bonus it hots bulls eye for me then when I switch to my 165gr interbond hunting loads they hit 3" high which is just where I want it. Works out pretty well I think. Another lighter load is 49gr of varget and 150gr bullet. Nets me around 2750 fps
 
A PAST recoil sheild and some lighter bullets would probably be your friends here, as others have mentioned. Using them for practice will improve your confidence and form with the gun. Sight in for full strength loads just before season rolls around. When there's a big buck or elk in front of you, you won't notice the extra recoil and hopefully your body remembers how you were shooting with the light loads. A flinch is no good for hunting, I had a really light 300 win mag for a bit and learnt it the hard way. Took a lot of effort to unlearn that wince.
 
Is the butt end on tikka synthetics hollowed?If so,you can fill it with plumbers putty or lead shot etc. Will add a bit of weight to the rifle and dampen recoil. 30-06 is no slouch on the shoulder in a light weight rifle and i don't think a lot of people realize this til after the sale.
 
Back
Top Bottom