To clarify, did you destroy these O rings shooting or were they bu$$ered to start with do you think?O rings on the gas system are toast.
One came out in one piece but destroyed. And the other one is non existent.
I put in some black o rings I was able to find.
And ordered some viton orings off amazon. (Higher heat)
you might do a bit of preemptive spraying of CLP into the gas piston system before you try removing the pistons. the other issue is you might take a look into the bore that the piston rides in, it might be a bit rough. nothing a little bit of fine sandpaper in a cleaning kit slotted jag chucked in a drill won't cure. keep us posted.Another 75 target loads today.
It didn’t like the challenger with the aluminum color base. I have many boxes and the “brass” portion differs a lot on them it seems.
When me and Fred0000 had it out the other day we shot challeneger target loads no problem. Along with 25 challenger slugs too.
But today. Was seeing double feeds and failure to extract. The lip on the shells were very rounded from what I could tell.
Old lady found the missing gas oring on the floor today. So it didn’t disintegrate it. It looks like it tore apart when was removed.
So for me. I will only take apart the gas system when I feel it’s time to clean. And have orings on hand just incase.
you might do a bit of preemptive spraying of CLP into the gas piston system before you try removing the pistons. the other issue is you might take a look into the bore that the piston rides in, it might be a bit rough. nothing a little bit of fine sandpaper in a cleaning kit slotted jag chucked in a drill won't cure. keep us posted.
Thank you!Apparently these are manufactured by a Turkish gun company called Saricam Arms, and they’re rebranded by Panzar Arms:
https://saricamarms.com/products-catalog-2025.pdf
Apparently these are manufactured by a Turkish gun company called Saricam Arms, and they’re rebranded by Panzar Arms:
https://saricamarms.com/products-catalog-2025.pdf
Source ? I cannot find anything associating the 2
I’ve order the s&j mag tube extension. Hopefully it fits on no issue.
Guess we’ll find out
Ahhhh cause it looks the same. Makes sense.
Not a viable source imo.
Have a look at Rangeview, they usually have a good selection.Looking to replace the front sling mount with a QD style but, having a hard time finding anything. Any suggestions? GG&G seems to show one but unobtanium at this time it appears.
Thank you! Looks like they have a picatinny style and a mag-pull QD mount for the rail. That will work.Have a look at Rangeview, they usually have a good selection.