RBCS warranty? Update

[roaddog1]

would be nice to see if any of the other brands have the canted pin! so a person would know in case i ever get a new one.

 

[roaddog1]

My FC brass is all crimped too just like my Hornady. The pocket needs to be swaged or cut so there is a taper for the primer to follow.

fc brass thats federal?

 

[Brianma65]

My FC brass is all crimped too just like my Hornady. The pocket needs to be swaged or cut so there is a taper for the primer to follow.

What about my rem brass, it happens to them also.

 

[Brianma65]

fc brass thats federal?

Yes.

 

[Brianma65]

would be nice to see if any of the other brands have the canted pin! so a person would know in case i ever get a new one.

I think it's a small defect in the rcbs primer tool, no big deal, it'll do until I get another.

 

[kamlooky]

Less hassles and better results dealing with RCBS warranty than that of Snap-On.

 

[X-man]

RCBS typically has to deal with high call volume post Xmas. Mondays and Tuesdays are pretty busy too from guys calling with questions after a weekend reloading session. I generally just email. Fantastic service.

 

[PitBull1973]

Brass is all once fired by me, and no , I never checked to see if they need to be swagged, I didn't think I had to do that.

Military brass need to be crimped. If your shooting norinco then swagged your brass

 

[Brianma65]

Military brass need to be crimped. If your shooting norinco then swagged your brass

I'm using all factory, but if I ever use military, ill ale sure I crimp.

 

[PitBull1973]

I've got the same tool and just had a look . It's seems to be dead on centre. Have patience and maybe that might have an answer

 

[Brianma65]

I've got the same tool and just had a look . It's seems to be dead on centre. Have patience and maybe that might have an answer

ya, I'm in no hurry, I have lots of ammo on hand. I'll try again today.

 

[Brianma65]

RBCS , have told me that some of the parts in this model has been upgrade. A new plastic fitting ,Also new pins and a new bushing, the pin and the barrel shaped bushing are the upgrade part.So , turned out good. Thanks for all your help. One more thing, they know of this problem.

 

[fchan]

RBCS , have told me that some of the parts in this model has been upgrade. A new plastic fitting ,Also new pins and a new bushing, the pin and the barrel shaped bushing are the upgrade part.So , turned out good. Thanks for all your help. One more thing, they know of this problem.

Not surprised this turned out good. As others have stated, RCBS is one of (if not, THE) best for warranty support. They know how to take care of their customers and have built a good following as a result.

Glad to hear it worked out for you in the end. Sucks that you got stuck in the xmas backlog.