Rem 783 - Some Range Testing - post 18

rgv, it is awesome that your rifles are working great. One of the best rifles I have ever owned was a Rem 700 Classic in 222... still kick myself for ever selling it. But there is no doubt that many many many Rem 700 actions have seen the care and attention of a quality gunsmith when a precision rifle is put together or just to make them functional.

If that wasn't the case, why would anyone bother to invest so much into custom actions? pretty only goes so far.

I think it is a very long stretch to expect a factory barrel from Rem is going to keep up with a Krieger, Shilen, Bartlein, Brux, Proof, CarbonSix, McGowen, Hawk Hill and all. Can it happen? Sure... but the ones I have helped customers with over the last few years sure didn't impress.

So what if that barreled action doesn't shoot as desired? What if the barrel starts to warp as it heats up? Don't tell me you haven't seen this before in a factory Rem barrel?

So what if that action starts to show primer cratering? Or tears up the rim during the extraction process, or any of the many maladies I have illustrated? I am not making these things up... ask a quality gunsmith or two or twelve. I bet they can offer more things I have not put up.

Are you saying that these barreled actions for $625 have a blue printed, bushed, shimmed and tuned action attached to a quality "40X" barrel?

If that is the case, they would have all sold out in a day.

Rem 700's are what I started into the precision shooting world and I do a significant part of my business supporting this platform. There is an enormous market for support and all sorts of bits and pieces to change... and tons of really good smiths ready to fix and improve.

Kind of pointless for this level of support if the factory rifle did everything anyone could possibly want and win matches anywhere....

Jerry

PS.. that KRG stock looks very promising... thanks for the heads up. I am sure it will make waves in 2018 season.
 
Last edited:
I was looking through the recent caliber magasine and I was struck by a full page ad Remington took out.

It was to promote the Rem 783 wearing WALNUT stocks.

WALNUT... how's that for a blast from the past.....

Interesting...

Jerry
 
rgv, it is awesome that your rifles are working great. One of the best rifles I have ever owned was a Rem 700 Classic in 222... still kick myself for ever selling it. But there is no doubt that many many many Rem 700 actions have seen the care and attention of a quality gunsmith when a precision rifle is put together or just to make them functional.

If that wasn't the case, why would anyone bother to invest so much into custom actions? pretty only goes so far.

I think it is a very long stretch to expect a factory barrel from Rem is going to keep up with a Krieger, Shilen, Bartlein, Brux, Proof, CarbonSix, McGowen, Hawk Hill and all. Can it happen? Sure... but the ones I have helped customers with over the last few years sure didn't impress.

So what if that barreled action doesn't shoot as desired? What if the barrel starts to warp as it heats up? Don't tell me you haven't seen this before in a factory Rem barrel?

So what if that action starts to show primer cratering? Or tears up the rim during the extraction process, or any of the many maladies I have illustrated? I am not making these things up... ask a quality gunsmith or two or twelve. I bet they can offer more things I have not put up.

Are you saying that these barreled actions for $625 have a blue printed, bushed, shimmed and tuned action attached to a quality "40X" barrel?

If that is the case, they would have all sold out in a day.

Rem 700's are what I started into the precision shooting world and I do a significant part of my business supporting this platform. There is an enormous market for support and all sorts of bits and pieces to change... and tons of really good smiths ready to fix and improve.

Kind of pointless for this level of support if the factory rifle did everything anyone could possibly want and win matches anywhere....

Jerry

PS.. that KRG stock looks very promising... thanks for the heads up. I am sure it will make waves in 2018 season.

Agreed, remington barrels suck.

Here are some options:

- get a donor rem 700 action, have a company like Insite Arms spin up a barrel. Lot's of options if you want to make it a switchlug/remage setup. WTO, BugNut, ARC, etc..
- get a Tikka CTR, sell stock and place in KRG chassis
- Get a Savage and put it in a KRG chassis, etc.
- get a Bergara rifle
- get a Ruger RPR
- get an MPA rifle
- Seekins is coming out with a PRS rifle that should cost around $2k USD
- etc, etc, etc.

Companies are starting to wake up and see that their is a need for more budget options geared towards PRS type shooting. And most of them are going off of the remington 700 footprint, because there is a lot of aftermarket options for them. Other bigger companies such as Tikka and Savage are offering good models as well, and of course they have aftermarket support. Or you can buy a gun designed for budget PRS right out of the box, such as a Ruger RPR, Bergara, MPA, Seekins, etc...

There is ZERO reason to try and bubba up a remington 783 to make a PRS rig out of it. Other companies have better options for a budget PRS rig. Going the 783 route will just leave people frustrated with the lack of support and options.

People listen to you, even when it comes to PRS stuff (even though you have zero experience in this discipline). It's disappointing that you are giving them bad advice, and quite frankly I'm wondering what you have to gain from it.

I have a feeling that there is going to be some CGN'ers out there that will be blindly running around on the range with some bubba'd up remington 783's with SFP scopes in MOA, trying to convert inches and feet into MOA with some of the horrible advice that is given out on this forum...
 
Last edited:
I've enjoyed this thread but while I appreciate anyone experimenting I can't see the reason to switch from the R700 to the R783. I've had dozens of R700's and while they are not as nice as my Surgeon's, PGW's etc they are perfectly serviceable. Currently five R700's form the basis for customs in .223, 260, 300WSM and 300WM and they perform perfectly well as really, while an action is important, it is not the prime component IMO whereas barrel, trigger and stock actually are.

Incidentally, the barreled actions in 6.5 Creedmore are very nice - mine now sits in a Greyboe with a Heathen brake and, quite honestly, that would be a cost effective way to get into a game like PRS. Of course my 6xc from Insite is better - but, hey, I am an unabashed gun snob LOL !

More seriously, I really do think newer shooters looking for aftermarket support and whatnot are best off sticking to a R700 or (if they insist) a Savage :)

Bob
 
Not sure what with all the complaints about no aftermarket triggers?
2 minutes with a fine file and scotchbrite wheel and the thing is pretty much magic

Out of 5 rifles I bought heres what I am not happy with:

getting a 12 twist barrel on 3 of the .223 when remington assures me they only come in a 9 twist.....

My .308 came with a big dent in the bolt face which leaves substantial dimples in fired primers

Dealing with warranty

The design is great, spotty qc is my only complaint


Also the "remington" 783 is actually a marlin x7 with a smaller ejection port and a few other minor cosmetic differences.
 
Not sure what with all the complaints about no aftermarket triggers?
2 minutes with a fine file and scotchbrite wheel and the thing is pretty much magi
c

Out of 5 rifles I bought heres what I am not happy with:

getting a 12 twist barrel on 3 of the .223 when remington assures me they only come in a 9 twist.....

My .308 came with a big dent in the bolt face which leaves substantial dimples in fired primers

Dealing with warranty

The design is great, spotty qc is my only complaint


Also the "remington" 783 is actually a marlin x7 with a smaller ejection port and a few other minor cosmetic differences.

SSSSSHHHHH, don't tell anyone. How else am I going to sell them a replacement trigger? Oh wait.... there aren't any..... not yet anyways. But doesn't really matter, really happy with mine after a little TLC.

Sorry, to hear your rifles have had spotty QC. Both of mine have been awesome. Wonky barrel twists.... yeah, that is not good

Hope they get resolved.

Jerry
 
As I have mentioned before, I have 2 of these rifles. One has seen about 600rds with 2 barrels.. factory and McGowen prefit. The other has seen around 270rds with a CarbonSix barrel.

Here are some pics of how things are working so far....

IMG_1386.jpg

Where the bolt handle is when the primary extraction step in the bolt handle hits the opposing camming surface on the receiver. Both do it the same... perfectly positioned. I have done nothing to the bolt handle to reposition it or adjust the surfaces.

IMG_1387.jpg

POP!!.. the final few degress of bolt lift and the bolt moves back about 1/8"... note the location of the shroud in these 2 pics... As long as the rim isn't torn off the case, the fired case has just been popped off the chamber walls and is coming out of the chamber. On either rifle, the camming surfaces on the bolt and receiver show very even contact without any galling or denting. Surfaces look to be well hardened and properly aligned.

IMG_1391.jpg

Right Side

IMG_1392.jpg

Left side.... how's that for lug contact with the receiver? I have not lapped these lugs in any way. I have cycled the action a bunch but this is one of the many positives of a floating bolt head. If you look at the inner surface of the lug and just along the outer edge, you can see a hint of black. That is the bluing from the original finish on the lugs. The finish has been rubbed off due to the very nice contact made with the receiver. Very even contact and pretty much 100% surface area.

IMG_1394.jpg

For complete disclosure, here are the 2 bolts.... the second bolt has around 50% lug contact but it is even over the entire length which is really what supports the bolt face from moving around during firing. I bet the 2nd one will simply wear in with use.

Jerry
 

Attachments

  • IMG_1386.jpg
    IMG_1386.jpg
    71.3 KB · Views: 263
  • IMG_1387.jpg
    IMG_1387.jpg
    70.6 KB · Views: 268
  • IMG_1391.jpg
    IMG_1391.jpg
    53 KB · Views: 265
  • IMG_1392.jpg
    IMG_1392.jpg
    50.4 KB · Views: 268
  • IMG_1394.jpg
    IMG_1394.jpg
    62.4 KB · Views: 270
  • IMG_1396.jpg
    IMG_1396.jpg
    71.4 KB · Views: 262
  • IMG_1397.jpg
    IMG_1397.jpg
    123 KB · Views: 265
IMG_1396.jpg

Here are the bolt faces... I have not chucked them in a lathe to skim them flat. That is how they are out of the box. I have not decoppered any surface or removed any bits of brass. In fact, they are pretty dirty from shooting them and neglecting to clean the bolt faces.

I love Savage rifles... I have competed with them for many years and own several. None have a bolt face this flat without machining.

IMG_1397.jpg

IMG_1398.jpg

I use Hrn brass in the CarbonSix barreled action. I have not bushed the firing pin holes... I have not modified the firing pin. I have swapped in a Wolff Rem 700SA 24lbs spring. Looks to be enough jam.... loads are near printed max and what is typical of a H4350 load shooting 140gr type bullets. Firing pin impacts are pretty darn centered, no cratering, no scraps or gouges in the case head. The fired brass is dead flat.

IMG_1400.jpg

PRVI 22-250 brass formed to 6.5 CM... this is fired in the McGowen Rem 783 prefit.

IMG_1401.jpg

Again, I have done nothing to the bolt face or firing pin hole.

Jerry
 

Attachments

  • IMG_1396.jpg
    IMG_1396.jpg
    71.4 KB · Views: 262
  • IMG_1397.jpg
    IMG_1397.jpg
    123 KB · Views: 264
  • IMG_1398.jpg
    IMG_1398.jpg
    146.3 KB · Views: 267
  • IMG_1400.jpg
    IMG_1400.jpg
    105.9 KB · Views: 264
  • IMG_1401.jpg
    IMG_1401.jpg
    90.5 KB · Views: 263
IMG_1390.jpg

This blurry image actually shows up the contact area on the bolt body better. As indicated by the screwdriver, note the wear in the finish on the bolt body. I have not shimmed or modified the bolt body here in any way. I have not touched the rear bridge surface in any way. This is simply how the bolt locks up.

Except for polishing a number of sharp surface in the action raceway, I have done ZIP to the action.

Here is an interesting quirk... the receivers have serial numbers that are around 30,000 apart. I don't know if that actually means number of rifles but they are most certainly not sequential.

The entire bolts interchange!!! Yep, I can swap bolts and the headspace is within 1 to 2 thou. Operation is the same. Triggers works. I would love to see if other Rem 783 SA's can swap the entire bolt. The brass will interchange between barreled actions.

As I have said, the new KY plant is doing a whole lot of things right. There has been some serious investment in tooling and machinery. Hard to imagine, this much effort applied to just another "entry level rifle". I sure hope this is a sign of very positive things to come from big Green.

Jerry
 

Attachments

  • IMG_1390.jpg
    IMG_1390.jpg
    60.8 KB · Views: 267
Neat story bro.

This action could give you a handjob while you are shooting off of barricades, still wouldn't make it the best budget PRS rig (would be a nice feature though, wouldn't it!)

The trigger might be what YOU want after a little filing - but triggers are very subjective. What if they want a two stage trigger? Starting to become the preference in PRS type shooting for a number of reasons, oh wait, you are stuck with that trigger until you get rid of that action...

What if the shooter wants to try out one of the many chassis offerings currently out there? They provide a lot of modularity, and chassis' such as the JAE and MPA are coming out with some cool innovations with ARCA rails, barricade stops, making them more effective for PRS type matches. Oh wait, there is no inlet for a rem 783 and the company is saying that they have no plans of making one....

A lot of the problems you state about remington 700 actions and others are overblown and misleading. Tomochan had some comments above that are pretty on point.

But don't take my word for it. Actually go out and attend/shoot some PRS matches to actually see what the competitions are about, and understand what components make a good to great PRS rifle. You'll get to see all the different types of components people are running, you'll have a hard time finding two exact rigs, there are that many options out there. Since you've never seen/heard of a KRG chassis before (which has been around a long time in the PRS world), it would behoove you to do so. Especially if you are recommending PRS type build to your customers (I hope the number of people you have mislead isn't too high yet).

I'm not doing this just to be difficult with you. I'm doing this because there are lot of people on this board that don't have the experience to know better that are being misdirected on budget PRS builds.
 
Two questions.

1) Wouldn't getting a handy be distracting whole shooting off a barricade
2) Do rifles identify as male or female as that would help me determine if I let my gun touch me in my special place
 
Hey Jerry,

I have been following this pretty closely as I very much enjoy budget minded ideas to get into the shooting sports. I am working on one that's 1000m for $1500 with optics. I have local guys talk to me all the time about getting into Precision shooting and are scared of the costs that they read about on forums such as here. Most actually have PM'd me about my builds on here vs commenting as they seem scared of what other CGN'ers would think of them.

I learned at a young age Precision shooting from an "Old Guy" who had a Mosen Nagant with a Leupold 20x that it doesn't take much to shoot 1000. Just takes a rifle, some optics, and tons of practice. He is long sense passed but all his messages to me have been carved into my mind set. I try to pass these lessons on anyone that asks.

If you have a rifle, optics, and tons of ammo you can find out what you need to do to get the rounds on target. PRS being the new "in" thing needs to learn its about getting people out shooting the sport and telling people "bring the rifle you know with the scope you know and a ton of ammo"


That's the idea I had getting into F-Class long time ago, unfortunately I got tired of hearing the "pfft you need to spend more money" or "that isn't going to work you need...." and the "click" it created; I left the sport. This was before a million forums about shooting sports where people can read and get scared before ever getting started.

I hope PRS doesn't go this way as I rather like it as I enjoy run and gun events that take skill. Though reading some comments on CGN and other sites and with talking to people at events; I see that is maybe where it is heading already. Heck it already created a division of the Precision forums on here. Remember people its about the community and how we all share the same goals of getting rounds down range.

This idea of using a 783 is interesting. You have seen some potential and have expressed to the CGN world your knowledge on it. You have now shown us you have the option of using your hunting rifle, spin on a pre-fit and do an event. This means you save money to buy more ammo, or reloading gear to get started, and become better in the sport. Sure your not going to compete with the top tier guys out there, but you get the feel for it and aren't breaking the bank. Think to, if you get hooked you can then move on from there. Heck some guys I know who get out there and find out they didn't come in last are amazed and start to see where they can improve not only their rifle but in skills they have learned.


Jerry, keep up the good work and I may PM you in regards to the 783 as I think it maybe the bases of my next budget build once I finish the 308 and sell it off at cost to get someone else shooting.

Pro Patria
 
Hey Jerry,

I have been following this pretty closely as I very much enjoy budget minded ideas to get into the shooting sports. I am working on one that's 1000m for $1500 with optics. I have local guys talk to me all the time about getting into Precision shooting and are scared of the costs that they read about on forums such as here. Most actually have PM'd me about my builds on here vs commenting as they seem scared of what other CGN'ers would think of them.

I learned at a young age Precision shooting from an "Old Guy" who had a Mosen Nagant with a Leupold 20x that it doesn't take much to shoot 1000. Just takes a rifle, some optics, and tons of practice. He is long sense passed but all his messages to me have been carved into my mind set. I try to pass these lessons on anyone that asks.

If you have a rifle, optics, and tons of ammo you can find out what you need to do to get the rounds on target. PRS being the new "in" thing needs to learn its about getting people out shooting the sport and telling people "bring the rifle you know with the scope you know and a ton of ammo"


That's the idea I had getting into F-Class long time ago, unfortunately I got tired of hearing the "pfft you need to spend more money" or "that isn't going to work you need...." and the "click" it created; I left the sport. This was before a million forums about shooting sports where people can read and get scared before ever getting started.

I hope PRS doesn't go this way as I rather like it as I enjoy run and gun events that take skill. Though reading some comments on CGN and other sites and with talking to people at events; I see that is maybe where it is heading already. Heck it already created a division of the Precision forums on here. Remember people its about the community and how we all share the same goals of getting rounds down range.

This idea of using a 783 is interesting. You have seen some potential and have expressed to the CGN world your knowledge on it. You have now shown us you have the option of using your hunting rifle, spin on a pre-fit and do an event. This means you save money to buy more ammo, or reloading gear to get started, and become better in the sport. Sure your not going to compete with the top tier guys out there, but you get the feel for it and aren't breaking the bank. Think to, if you get hooked you can then move on from there. Heck some guys I know who get out there and find out they didn't come in last are amazed and start to see where they can improve not only their rifle but in skills they have learned.


Jerry, keep up the good work and I may PM you in regards to the 783 as I think it maybe the bases of my next budget build once I finish the 308 and sell it off at cost to get someone else shooting.

Pro Patria

If you want to get new shooters on the range on a budget, then sure, I can see the logic behind a 783. It's not the worst option out there for plinking.

If you want to seriously consider PRS, there are better budget options. Jerry has never shot PRS or PRS type matches, he doesn't know from experience what works and what doesn't for those types of matches. The people that do are clearly pointing out that there are better options for PRS.

We are trying to save people money and headaches, because if they are serious about competing in PRS type matches, they will grow out of the 783.

This is why it's concerning when such a "respected" member of this forum makes suggestions on builds for a discipline he has zero experience in. People are going to listen, and be pointed in the wrong direction. It's like going to a fly fishing shop in Kelowna and asking about what gear to use to catch white Marlin in Guatemala. Same sport, but completely different gear and techniques to achieve the desires outcome.
 
If you want to get new shooters on the range on a budget, then sure, I can see the logic behind a 783. It's not the worst option out there for plinking.

If you want to seriously consider PRS, there are better budget options. Jerry has never shot PRS or PRS type matches, he doesn't know from experience what works and what doesn't for those types of matches. The people that do are clearly pointing out that there are better options for PRS.

We are trying to save people money and headaches, because if they are serious about competing in PRS type matches, they will grow out of the 783.

This is why it's concerning when such a "respected" member of this forum makes suggestions on builds for a discipline he has zero experience in. People are going to listen, and be pointed in the wrong direction. It's like going to a fly fishing shop in Kelowna and asking about what gear to use to catch white Marlin in Guatemala. Same sport, but completely different gear and techniques to achieve the desires outcome.

I have bolded the key things that you have to consider. Its getting people out shooting, and using a budget hunting rifle people are actually looking at buying or have already to get out there is what I would see this as vs the "serious contender". People get scared of this thought and run away from it vs trying out the sport when it comes from "people in the know". Who knows, you might even see the aftermarket world get into the 783 one day and this thread be something we all try and search for one day.

Allowing people to take something that they have, that the didn't know they could and go do an event is way better then telling people you can't do it with what you have you need to look elsewhere. Again this is why I left F-Class.

Yes I do have 3-5k rigs but I worked my way to this and learned what I needed as I went. This way when it came time to take things "seriously" I knew what would work for me and I had built the skills to know how to use that high end gear. My dual purpose rifles soon became more purposeful in specific events and I worked and saved for it once I knew what I needed vs what worked for someone else. I believe it was you who mentioned that there are no two rifles on a PRS line that are the same, each one is tailored to the individual.

Let people try it, and if they like it then look into going further. They can always sell that pre-fit barrel to the next guy looking to try it, and then it returns their 783 to a hunting rifle again leaving them to look into a dedicated PRS build. If you look at this as he is misleading people then I think you are looking to deeply and taking the PRS sport to seriously as long as everyone is safe and having fun then it doesn't matter what they use.

Look at this as; "some person with a hunting rifle who wants to try out a discipline being able to spin on a barrel to what he already has and is used to using in field and improvised shooting environment under stressful conditions (what hunting is, kinda sounds like PRS too;)) and trying an event out" Let them decide if they want to become a serious contender and move on from there.

Pro Patria
 
Obviously this thread went off the rails here. I am not trying to put words in peoples mouths but if you break this down everyone is saying something correct.

Jerry is saying the 783 has potential. He is probably right, it has some neat features at a lower price (floating bolt head, OK enough trigger, decent build quality).

Kthomas is also correct in saying that it is not a great PRS choice currently. There is almost no aftermarket support for it and that means it is a non-starter. PRS, like all shooting sports, are a bit of a gear game and without a readily available DBM it can't really work. The Tikka T3 is arguably a much better action than both and it is just recently getting more after market support (yes I know the parts have been around for awhile but you certainly were not walking into a store and finding stuff like for a 700 or clone).

Maybe one day the 783 will have more support, maybe it won't. What I do know is that if you shop around you can get into the game for not a tonne of money. At my last match there was a guy running a stock Tikka CTR (not sure what cartridge) and he did very well.

Realistically to get a decent rig to shoot PRS in Canada you can probably do it for $2,500 in Canada. A Tikka CTR/Rem700 with the magpul stocks is $1,500 all in and then you have $1,000 for optics. I just picked up a Bushy HDMR for right around $1,000 so it can be done. With enough practice this set up could probably win matches. However, you are not done spending money. You probably have to send 5,000+ rounds down range before you are good enough to win and we all know that is going to cost you $5,000 if you hand load and a very large amount of time.
 
I have bolded the key things that you have to consider. Its getting people out shooting, and using a budget hunting rifle people are actually looking at buying or have already to get out there is what I would see this as vs the "serious contender". People get scared of this thought and run away from it vs trying out the sport when it comes from "people in the know". Who knows, you might even see the aftermarket world get into the 783 one day and this thread be something we all try and search for one day.

Allowing people to take something that they have, that the didn't know they could and go do an event is way better then telling people you can't do it with what you have you need to look elsewhere. Again this is why I left F-Class.

Yes I do have 3-5k rigs but I worked my way to this and learned what I needed as I went. This way when it came time to take things "seriously" I knew what would work for me and I had built the skills to know how to use that high end gear. My dual purpose rifles soon became more purposeful in specific events and I worked and saved for it once I knew what I needed vs what worked for someone else. I believe it was you who mentioned that there are no two rifles on a PRS line that are the same, each one is tailored to the individual.

Let people try it, and if they like it then look into going further. They can always sell that pre-fit barrel to the next guy looking to try it, and then it returns their 783 to a hunting rifle again leaving them to look into a dedicated PRS build. If you look at this as he is misleading people then I think you are looking to deeply and taking the PRS sport to seriously as long as everyone is safe and having fun then it doesn't matter what they use.

Look at this as; "some person with a hunting rifle who wants to try out a discipline being able to spin on a barrel to what he already has and is used to using in field and improvised shooting environment under stressful conditions (what hunting is, kinda sounds like PRS too;)) and trying an event out" Let them decide if they want to become a serious contender and move on from there.

Pro Patria

I understand your sentiment and kind of agree with you but at the same time I think in the PRS world you would be setting that person up for a very difficult day. I have seen people show up at matches with hunting rigs with hinged floor plates and SFP optics and the day is a challenge for them. The same goes for people who have shown up with AR15s and 4X optics. Run what you brung is an awesome sentiment but for people to have fun they have to have a little bit of success and there is a base level of equipment required.

However, with all that said, the PRS community is one of the nicest around. I myself have lent someone my custom rig and sold them all the loading components needed to complete in a match. Shawn338 and Span09 have taken their own rigs and their own hand loaded ammo to put on an expo if what PRS is all about. If you are interested ask someone who is into the sport and they will probably help you out if they can. Most guys I know have at least a couple of guns kicking around...

If someone ever wants to come to a PRS match in Southern Alberta that I am attending let me know and you can borrow my gun,a ll you have to do is pay for ammo (and anything you break haha)
 
I have bolded the key things that you have to consider. Its getting people out shooting, and using a budget hunting rifle people are actually looking at buying or have already to get out there is what I would see this as vs the "serious contender". People get scared of this thought and run away from it vs trying out the sport when it comes from "people in the know". Who knows, you might even see the aftermarket world get into the 783 one day and this thread be something we all try and search for one day.

Allowing people to take something that they have, that the didn't know they could and go do an event is way better then telling people you can't do it with what you have you need to look elsewhere. Again this is why I left F-Class.

Yes I do have 3-5k rigs but I worked my way to this and learned what I needed as I went. This way when it came time to take things "seriously" I knew what would work for me and I had built the skills to know how to use that high end gear. My dual purpose rifles soon became more purposeful in specific events and I worked and saved for it once I knew what I needed vs what worked for someone else. I believe it was you who mentioned that there are no two rifles on a PRS line that are the same, each one is tailored to the individual.

Let people try it, and if they like it then look into going further. They can always sell that pre-fit barrel to the next guy looking to try it, and then it returns their 783 to a hunting rifle again leaving them to look into a dedicated PRS build. If you look at this as he is misleading people then I think you are looking to deeply and taking the PRS sport to seriously as long as everyone is safe and having fun then it doesn't matter what they use.

Look at this as; "some person with a hunting rifle who wants to try out a discipline being able to spin on a barrel to what he already has and is used to using in field and improvised shooting environment under stressful conditions (what hunting is, kinda sounds like PRS too;)) and trying an event out" Let them decide if they want to become a serious contender and move on from there.

Pro Patria

baker42, thanks for GETTING IT !!!!

This is not a new story... I have seen it over the last 10yrs in F class. Now we have a shrinking audience with all the "cool" stuff. Newbies ask "how much does it cost to start?"... they point to their very good but very expensive gear... newbie walks away. I have competed and still compete with a Savage Stevens 200... next to my very expensive and exotic Titanium single shot.

The price difference in massive... the performance on target, not so much.

PRS has quickly become a very expensive sport. Was carrying around $1000 worth of CF tripod really the intent of the sport? or needing a rifle that is 5 digits to play with the cool kids?

PRS has done in a few seasons what F class took a decade and that is price shooters right out of the game. Video after video shows up some of the nicest rifle kit you can imagine.. yeah, I know, I sell alot of this stuff. But like watching exotic cars, everybody wants one... precious few can afford one.

I keep hearing this thing about "you don't compete, how could you possibly know?" What is so wonderfully different about a mag fed bolt action rifle used in PRS vs all the thousands that have been used in Sniper/Tactical matches over the last several decades?

Maybe there is some magic that I don't see in the pictures and videos but they sure look like A5 style stocks to me or alot like the chassis I can sell you.

I totally get that we move up our bling as we get more and more involved in a sport.... note the Titanium receiver and ubber expensive scope that I own and compete with. BUT that is not what is truly necessary and all too often those in any sport forget that. I keep my Stevens around so that newbies can see an entry point. No, it is most certainly not fancy or pretty or blingy BUT it will get you on the podium if you LEARN HOW TO SHOOT.

And learning how to shoots first requires a shooter to get into the game.... and then be able to afford to shoot, and shoot and shoot and shoot and shoot.

a shooter with the basics I have outlined will be miles ahead with this competitive rifle under $2000 and $5000 available for extra barrels, reloading supplies, trips the range, trips to matches. How many can start at $7k then add a couple of thousand to reload, a couple more to replace the barrels consumed each season, and whatever they spend to go practise?

As I have mentioned before, the real tech that I see in PRS are those amazing bags.... AND learning how to use them so you can get stable. Sure, the rifle has to function, it has to feed, it has to be accurate enough, it has to fit you... but is the fanciest bling the only thing that works? Skill comes from hours of practise and lead sent down range.

So I haven't been to a PRS match.. yet. But the story is nothing new and the end game, not surprising.

If a sport only favors ever increasing costs to "win", that sport will get real lonely real fast.

The Rem 783 is an action that, with a little investment, be transformed into a fully functional rifle. There are just enough parts to make that happen:

Boyds provarmint stock.. if you like A5 style stocks.. done. And any competent gunsmith can inlet into a "flat top" stock, it really isn't that much different from a Rem 700

PTG makes the DBM.. inlett into the Boyds above, you have a DBM set up.

MDT LSS chassis... yeah, not my fave but it is a chassis. Bug MDT and likely in 1/2 a day, they can export that CAD file into the ESS which I am sure many more will favor.

Match prefit barrels from a number of sources...and a good barrel is what makes a rifle accurate. Cost to completion, about 1/2 the cost of traditional installs.

tune the trigger, swap the bolt knob, change the firing pin spring, spin on a match barrel.... learn to reload and shoot and this rig is 1/3 minute capable. Will it feed, function and fire accurately? Mine sure do....

Is this the end all? Of course not... but it is one possible entry point that is functional and affordable. If there is interest, parts will come. Look at how far the "despised" Savage SA has come the last decade. Look at how fast the Tikka is gaining traction.. how many aftermarket triggers are there for that action?

Want to go Rem 700 or custom clone? No problem, happy to help you kit it out but that can get more expensive.

My posts and pictures and testing are to show real world results to back up what I am saying. I don't intend nor expect it to change any sport.... just give shooters an option and exposure to looking outside the box.

If shooters want to play along, great... more shooters, more parts. At the rate that Big Green is pushing the Rem 783 into the consumer market, we may have more owners looking for bling sooner rather then later. The investment they have made in its production indicate a serious platform for years to come. This rifle has only been on the market for 4 yrs.... I think it has done well for what support it has garnered so far.

Time will tell if the Rem 783 will gain any market acceptance... but at least those reading this post are aware of what it can do.

And if that drives more options in affordable performance, we all win.

Jerry

PS spending a bunch of money on a factory rig dressed up in fancy clothing is false economy when you spend even more money fixing all the flaws.
 
Jerry - YOU ARE NOT GETTING IT.

PRS is becoming a lot more affordable - there are a lot of sub $2000 rigs available that are good to shoot PRS right out of the box. Ever heard of the PRS production series?

You are late to the game. Lots of great rigs designed for PRS from the factory available on a budget. A person can get a great PRS rig for sub $2000. It's been spelled out here. They don't need to bubba together a 783.

Why are you so invested in this 783? Do you have any financial interest in it? I'm trying to see why you are trying to mislead members on CGN so much.
 
Last edited:
PS - PLEASE go shoot a PRS or PRS type match. You clearly don't know what you are talking about, and I'm trying to be polite about it. It's the least you can do if you are going to consider yourself an authority on it, and are recommending builds to customers.
 
Baker42 - I promise you that if anyone shows up to a PRS or PRS type match, people will be more than accommodating and friendly. Doesn't matter if they are shooting a 783, Lee Enfield, etc. We are just happy to see people shooting and we help people out in this community.

If anyone has any interest in shooting this type of stuff, please do your research before buying a 783. Those with PRS experience have pointed out a multitude of budget friendly PRS option. Manufacturers are really waking up to this sector, and options are getting better by the month.
 
Back
Top Bottom