rifles in 6.5 Creedmore?

[hoytcanon]

Drt

I had all the confidence in the world that you would place the bullet correctly.

 

[Brian46]

Was the paper a one shot kill?

Drt

must have only used one staple

 

[todbartell]

I actually have to rebuild my target stands. They are in pieces now. Taste like #### too

 

[Buckmastr]

Those pieces of your target stands will come in handy banging the bolt open

 

[.284]

Those pieces of your target stands will come in handy banging the bolt open

Hahahahahahahahaha!

 

[todbartell]

65k psi according to Quickload, similar or less than some you've posted recently

 

[Buckmastr]

65k psi according to Quickload, similar or less than some you've posted recently

Of course it is.
Always one upping. Creedmoor style!

 

[bronco_mudder]

There's as many crusty old codgers buying 6.5cm ammo as there is green shooters

Yup. Even I bought a rifle in this damned hipster chambering. It won’t do anything better than quite a few other rifles in my lockers, but who cares. I like guns, so why not have one in what is arguably the most popular cartridge selling on the market right now.

 

[LittleBoyLefty]

Yup. Even I bought a rifle in this damned hipster chambering. It won’t do anything better than quite a few other rifles in my lockers, but who cares. I like guns, so why not have one in what is arguably the most popular cartridge selling on the market right now.

That's the spirit...

 

[todbartell]

Creedmoor problems - when you can't decide on a load because they all shoot good

 

[Got Juice?]

Creedmoor problems - when you can't decide on a load because they all shoot good

I'll take load #3 for 500.00 alex

 

[Carbon12]

top right or middle are almost perfection! Good shooting!

Actually they are all great

 

[Longboat]

Creedmoor problems - when you can't decide on a load because they all shoot good

Tell me about it haha. Testing at 100 does not tell you much. Go to 200 and 300 and it will be more obvious what load to pick

 

[Tokay444]

OK i just bought a 100 Alpha LP Brass - So i'm set ! RJ

How did you make out?
Here's a guy already moving the 153gr A-Tips at near 2800fps using RL26...
https: / /forum.snipershide.com/threads/has-anyone-used-a-tips-in-6-5cm-yet.6950260/

 

[huntingfamily]

How did you make out?
Here's a guy already moving the 153gr A-Tips at near 2800fps using RL26...
https: / /forum.snipershide.com/threads/has-anyone-used-a-tips-in-6-5cm-yet.6950260/

135 grain a-tips?

 

[Tokay444]

135 grain a-tips?

No.

 

[chuck nelson]

How did you make out?
Here's a guy already moving the 153gr A-Tips at near 2800fps using RL26...
https: / /forum.snipershide.com/threads/has-anyone-used-a-tips-in-6-5cm-yet.6950260/

Having used RL26 in the CM a bunch, he won’t be getting much for brass life.

 

[Tokay444]

Having used RL26 in the CM a bunch, he won’t be getting much for brass life.

He's already shooting 75 cent projectiles, so my guess is that he likely isn't going to be beat up much by some shortened brass life.

 

[remington jim]

How did you make out?
Here's a guy already moving the 153gr A-Tips at near 2800fps using RL26...
https: / /forum.snipershide.com/threads/has-anyone-used-a-tips-in-6-5cm-yet.6950260/

Thx for the Read ! STILL waiting for my BRASS seems some peoples Week or so is a MONTH or so ! Oh Well ! RJ

 

[Tokay444]

Thx for the Read ! STILL waiting for my BRASS seems some peoples Week or so is a MONTH or so ! Oh Well ! RJ

That sort of anticipation kills me. It's hard not to get frustrated by it.