Also ,after they shaved the LP GB, weren’t there still problems with the fortis ,flexing under load from a bipod.![]()
I'm not sure if they shaved them down.
Also ,after they shaved the LP GB, weren’t there still problems with the fortis ,flexing under load from a bipod.![]()
It’s been a couple years, but I recall there being issues with Fortis Switch and the LP GB.I'm not sure if they shaved them down.
I just shot a five round group measured at .953.Would you consider trying a 139gr Scenar, the 142 SMK, or 140 Berger Hybrid? The ELDs have a secant ogive and can be sensitive to seating depth.
I know the Bergers are pricey (and hard to find) but they are very jump tolerant and may help tighten things up a bit as well. They also have a very good BC.
The SMK & Scenar are cheaper and easier to find but don't have the same BC as the Bergers but are still good bullets.
I say this as someone with zero gas gun experience but I know that traditionally AR mags are short and getting to the lands can be tough.
I just shot a five round group measured at .953.
165 SMK tipped and 45 g Varget.
At 2800 col.
My mag will allow 2845.
Problem is , I’m not sure what my my max jump would be as I don’t have the correct tool to measure the chamber Lenght.
I may load them up to 2830 and see if they fit
I’ve got a few more loads to test, all are around the 45 g of Varget that worked well.
Also I think the barrel is not a match barrel, to say the least.
And I’m stepping up to a Geiselle national match trigger.
So maybe that will tighten them up.
Just a heads up.
Anybody who uses a Geiselle National match trigger is gonna have to dremel the sides of the factory safety.
Yep, but it only took a few seconds,So what you're really saying is get the RADIAN WEAPONS safety ..![]()
Threads like this guarantee interest. Stag 10 build incoming!
Candocad.