Suggestions for a "big and slow" caliber?

Tried a load of RL22 with the 210gr Accubond Long Range in my 30-06 55grs gave 2430fps 56grs gave 2490fps in my 22" barreled T/C Prohunter.

I was very surprised that the 56gr load gave me a less than 1" 3 shot group at 100 yards only problem is with a 1 1/2" high 100 yard zero with my 165gr Accubond @ 2900fps I'm hitting over 12" lower with the 210gr bullets.

Unfortunately due to this zero difference I can't switch between the two loads so won't be loading the 210grs again until I've used up all my 165gr loads but when I get to them these big - slow 210gr bullets @ 2490fps will be awesome for anything I aim at.

They're slow and heavy, but when I said big I meant diameter wise. I'm looking for something that'll punch a bigger hole than what currently sits in the locker. You know that old saying "you can eat right up to the hole"? I want first hand experience in seeing the difference between fast and small (270, 243) and bigger and slower (leaning towards 358win or 9.3x57/62...)
 
My 300gr Partitions @ 2450fps loads from my 375H&H are big and slow and you can eat up to the hole.

I'm thinking the 30 cal 210's will do exactly the same.

My 45-70's also do the same big hole in thru and out...
 
Works well on both deer and moose.

The 300gr Partitions worked even better on my B&C record book grizzly but moving a little faster @ 2800fps from my 375RUM.
 
Can't beat the Garrett 530 grain rounds for the big bears.
The HMS and BB 430 grain hard cast rounds are good too.

I use 405 grain Woodleigh Weld Core jacketed bullets pushed to about 1950 fps in my 1895GS as a bear load.
Nothing that's not on steel tracks walking away from that.
 
Can't beat the Garrett 530 grain rounds for the big bears.
The HMS and BB 430 grain hard cast rounds are good too.

I use 405 grain Woodleigh Weld Core jacketed bullets pushed to about 1950 fps in my 1895GS as a bear load.
Nothing that's not on steel tracks walking away from that.

I load 525gr Piledrivers @ 1600fps and 550gr Crater's @ 1550fps in my Marlin 1895GS 45-70 packed these loads/rifle combo when I was working solo as a self employed free miner.
 
I think Suther should pursue that BLR idea a little further and should go for 450 Marlin. All the fun of 45-70 in a BLR package and ammo is no worries since he is reloading. Spitzers or whatever you want are in play and once you knock the spacer out of a magazine you can really mess around with OAL. I love a BLR action and bonus points for the takedown model.

Good fun. I'm still experimenting with mine and having a lot of fun doing it.
 
I think Suther should pursue that BLR idea a little further and should go for 450 Marlin. All the fun of 45-70 in a BLR package and ammo is no worries since he is reloading. Spitzers or whatever you want are in play and once you knock the spacer out of a magazine you can really mess around with OAL. I love a BLR action and bonus points for the takedown model.

Good fun. I'm still experimenting with mine and having a lot of fun doing it.

I didn't really notice the 450marlin was an option in the blr. Interesting. However, I feel like a 45-70 Marlin would do the same thing for cheaper no? (the big difference I can see is the ability to use Spitzer bullets in the blr, whereas 45-70 brass is probably cheaper and more available?)
 
Can't beat the Garrett 530 grain rounds for the big bears.
The HMS and BB 430 grain hard cast rounds are good too.

I use 405 grain Woodleigh Weld Core jacketed bullets pushed to about 1950 fps in my 1895GS as a bear load.
Nothing that's not on steel tracks walking away from that.

A .300 Win Mag will beat it. ;) Any normal off the shelf load 150-180grs will be more impressive on big bears.
 
I didn't really notice the 450marlin was an option in the blr. Interesting. However, I feel like a 45-70 Marlin would do the same thing for cheaper no? (the big difference I can see is the ability to use Spitzer bullets in the blr, whereas 45-70 brass is probably cheaper and more available?)

Its half a dozen of one imo. The two calibers are (intentionally) nearly identical. There are cheaper and more expensive options in the marlin lineup, but if you are sort of 'on the fence' about lever actions I would read a bit more about the BLR (or the Henry Long Ranger tbh though I don't own one). Of course there are 450 marlin marlins as well lol. It all comes down to preference.

I really like a detachable magazine and I think a lot of the 'lever action' stigma (if that is a thing) is related to tubular magazines rather than the lever action itself. A rack and pinion lever action like a BLR maintains a lot of the bolt action advantages in the lever package. I personally like that a lot. The 450 marlin is a rimless cartridge and for that alone it takes a small advantage over the 45-70 in cycling.

I don't have any issue buying new brass online (it isn't cheap but the light rounds seem to last forever so far) and I would be more than happy to share sources by PM if requested.

The point is that if you are considering a BLR in 358 as stated in an earlier post, I'd take a close look at the 450 marlin as it certainly is, in my opinion at least, big and slow and a lot of fun.
 
Its half a dozen of one imo. The two calibers are (intentionally) nearly identical. There are cheaper and more expensive options in the marlin lineup, but if you are sort of 'on the fence' about lever actions I would read a bit more about the BLR (or the Henry Long Ranger tbh though I don't own one). Of course there are 450 marlin marlins as well lol. It all comes down to preference.

I really like a detachable magazine and I think a lot of the 'lever action' stigma (if that is a thing) is related to tubular magazines rather than the lever action itself. A rack and pinion lever action like a BLR maintains a lot of the bolt action advantages in the lever package. I personally like that a lot. The 450 marlin is a rimless cartridge and for that alone it takes a small advantage over the 45-70 in cycling.

I don't have any issue buying new brass online (it isn't cheap but the light rounds seem to last forever so far) and I would be more than happy to share sources by PM if requested.

The point is that if you are considering a BLR in 358 as stated in an earlier post, I'd take a close look at the 450 marlin as it certainly is, in my opinion at least, big and slow and a lot of fun.

Oh I've got no problem with a tube magazine, or lever actions in general. I don't have one in my collection yet, but I certainly want one at some point. A savage 99 in 358win would be almost perfect (I love the look of the 99, and it's a bit more unique compared to a Marlin or win 94), but a blr or Marlin could certainly fit the bill too.
 
I have hunted with most of the nitro cals exept 600 and 700 nitro
Also have used the 72cal black powder.
My current big and slow is a 450-400 3inch and its is a beauty to shoot and hunt with. I hunt everything from whitetail to bear. And Ardent is correct when hunting a 300WM is more impressive at lets say 100yards than the big boys. Stopping a charge is a different story but that is not what we are speaking of hear. I like the big boys as they are a blast to shoot. Different than most people's and just plain cool.
They have all seamed to group very well, and from normal hunting positions they will shock you how well they shoot. I am sure no ones is saying they are bench guns and i am sure most cannot shoot them from the bench. But my current one i think with a hair of practice anyone could become prefessont with it to hunt with.
Little blood shot meat on game is great too.
 
I'm starting to see that I have been barking up the wrong tree on the direction I've been sharing.

How about my 21" barreled Rem 700 LSS chambered in 375RUM 350gr TTSX or Woodleigh @ 2450fps should fit the bill or you can down load it to equal low end 375 H&H or Ruger loads and when you feel like reaching out load it with 260gr Accubonds @ 3020fps and reach out to 600 yards.
 
Do you have any good hunting loads for .375 H&H with 300 grain or 280 grain. I am looking for most accurate recipe.


I'm with dogleg.....bite the financial bullet and go 375 H&H and load to what ever level you deem fit. There just isn't a better medium bore for anything than the 375 H&H. You can also make jacketed bullets from spent 223 brass and some melted lead and shoot for next to nothing without worrying about leading your bore. Bullets are readily available from 220 gn to 350 gn and a lot of the basic cup and core are cheap too. They are also adequate for hunting with the reduced velocities you are quoting.
You will also find that your 375 H&H will never fall from vogue and will appreciate over the years, so you will never lose a nickel on it. With the overall popularity of the 375 H&H you will always be able to find brass and bullets, for the rest of your life and your grandson's life. It is the 30-06 of the medium bores and there are so many out there in use that it will never die or even become endangered.
Zastava makes one that is relatively inexpensive and there is almost always 1F brass of one make or another on the EE. If you decide to go with a 375 H&H I can probably help you out with some brass......I have about 600 I think.....I could likely spare 50 to get you started.
I currently own three 375 H&Hs, a 375 Ruger, a 375 Wby and a 378 Wby.........so as you can see I am "familiar with that of which I speak". You will never regret purchasing a 375 H&H, it can be a pussy cat to shoot if you load it as such and it comes real close to a hell fire, fire breathing dragon if you choose to load it as such.
It has another attribute which a lot of people don't know......it tends to shoot a wide range of bullet weights to the same POI. This was a design criteria of Holland & Holland when they designed the cartridge as a "one gun does all" African rifle.
Take it from someone who has hunted and loaded extensively with the 375 H&H you can't go wrong and I doubt if you would ever regret purchasing one.
 
45-70 vs 300win mag

observations regarding the 300 Magnums and the 45-70 are a classic example of what is wrong with kinetic energy generation as a measure of effectiveness. The kinetic energy equation squares velocity but does not square bullet weight, thereby "prejudicing" the results towards those calibers that drive relatively light bullets to relatively high velocities. However, when one calculates power by giving equal value to velocity and bullet weight, as in the momentum measurement, the results are totally different. For the sake of this discussion, lets use modern 45-70 ballistics. As reflected by one of our loadings, the 45-70 can drive a 415-grainer to 1850-fps (from a Marlin lever-gun), producing 3150 ft/lbs of kinetic energy and 110 lbs of momentum. The 300 Winchester Magnum drives a 180-grainer to about 3085-fps for 3800 ft/lbs of kinetic energy and 79 lbs of momentum. It now starts to become clear that the manner of measurement tends to determine the outcome. Also, with the various 30 caliber guns it is essential to use expanding bullets in order to effect a clean and quick kill, whereas with the 45-70 bullet diameter is so substantial that expansion is not required to kill cleanly. When one goes to non-expanding bullets, the penetration depth achieved is much greater than can be achieved with any expanding bullet from any caliber. Indeed, about the most penetration that can be achieved in wet newspapers (a common test medium) with premium expanding bullets in any caliber is about 18-inches. With the 45-70 and proper hard-cast bullets, penetration depth can range anywhere from 36-inches with the lighter castings to 70-inches with the heaviest.#

High velocity guns shine where long-range shooting is required. However, when the game is extremely tough the various 300 Magnums leave much to be desired, tending to over-expand and invariably producing shallow penetration channels.#

A properly loaded 45-70 will shoot lengthwise through anything in North America, something the various high velocity calibers simply cannot do or even come close to.

GCI Ballistics

side note; the other hard hitter to the 45-70 is/was the Sharps 50-90 (Big 50) with a Black powder cartridge and is supposedly convertible to smokeless and can/could toss around close to 700 grain round. Unknown if a Sharps 50-90 is available and i am sure the brass is very limited and probably hand loads or custom only.
 
Last edited:
45-70 vs 300win mag

observations regarding the 300 Magnums and the 45-70 are a classic example of what is wrong with kinetic energy generation as a measure of effectiveness. The kinetic energy equation squares velocity but does not square bullet weight, thereby "prejudicing" the results towards those calibers that drive relatively light bullets to relatively high velocities. However, when one calculates power by giving equal value to velocity and bullet weight, as in the momentum measurement, the results are totally different. For the sake of this discussion, lets use modern 45-70 ballistics. As reflected by one of our loadings, the 45-70 can drive a 415-grainer to 1850-fps (from a Marlin lever-gun), producing 3150 ft/lbs of kinetic energy and 110 lbs of momentum. The 300 Winchester Magnum drives a 180-grainer to about 3085-fps for 3800 ft/lbs of kinetic energy and 79 lbs of momentum. It now starts to become clear that the manner of measurement tends to determine the outcome. Also, with the various 30 caliber guns it is essential to use expanding bullets in order to effect a clean and quick kill, whereas with the 45-70 bullet diameter is so substantial that expansion is not required to kill cleanly. When one goes to non-expanding bullets, the penetration depth achieved is much greater than can be achieved with any expanding bullet from any caliber. Indeed, about the most penetration that can be achieved in wet newspapers (a common test medium) with premium expanding bullets in any caliber is about 18-inches. With the 45-70 and proper hard-cast bullets, penetration depth can range anywhere from 36-inches with the lighter castings to 70-inches with the heaviest.#

High velocity guns shine where long-range shooting is required. However, when the game is extremely tough the various 300 Magnums leave much to be desired, tending to over-expand and invariably producing shallow penetration channels.#

A properly loaded 45-70 will shoot lengthwise through anything in North America, something the various high velocity calibers simply cannot do or even come close to.

GCI Ballistics

Good one fer sure.:cool: Always had good results with the larger caliber rifles using heavy cast bullets at 22 LR rimfire velocities. The 45-70 along with the .450 Marlin, .458 Win and .45 Colt are rather efficient dumpers of hefty critters inside of 80 yds with well placed shots on 'em when they're not aware of yer presence.

I really like the 9.3's & .375's as well when using cast boolits of weights from 270-300 gr. at similar speeds. Fook, they dig deep and bust bone well along the way.

I'm now workin' with the rifled 12 bore for primo knock down of big critters in close. I reckon my loads from my 3 in 12ga rifled guns will be more than ample for
the job when tossing 825 gr Paradox type bombs at 1050 fps. T'will be fun.;)

De Savage 212 with 2.5x Weaver.
DSC00805.jpg

De Rem 870 with Hastings barrel & Bushnell Holo Sight.
870 SLUGGER.jpg

De 825 gr boolit next to my .375 Win load.
12 bore 835 gr (2).jpg
 

Attachments

  • DSC00805.jpg
    DSC00805.jpg
    114.3 KB · Views: 81
  • 870 SLUGGER.jpg
    870 SLUGGER.jpg
    111.4 KB · Views: 81
  • 12 bore 835 gr (2).jpg
    12 bore 835 gr (2).jpg
    37.7 KB · Views: 85
Back
Top Bottom