Want vs Need. Want usually wins out
Had Corlanes in Dawson Creek rebarrel a T3x Lite 243 with an International Barrels Inc ( IBI ) 26" medium hunter contour 1:7 twist 5R, chambered in 22 Creedmoor.
Rifle weighs 9lbs 2oz with the Vortex Viper HS LR 4-16x50 w/ FFP XLR reticle in Talley tactical rings and a steel picatinny rail.
Picked up some large rifle primer pocket 22cm Alpha brass from Gary at Bighorn Sales in Houston. A .251 bushing for my Redding TypeS 6.5 Creedmoor neck die and a 22cal VLD micormeter seating stem for my 6.5cm seater die works well for making ammo. Hornady has listed a 22 Cm die set now which would be an easier route.
Quick n dirty gravel pit range test, shooting off the tail gate at 92 yards. Tried 3 different bullets, average 3 shot group was 0.65moa
Pretty happy with the results! Will run some more powder next time, these loads were pretty conservative
Cleaned the barrel and changed bolt handle, bolt shroud and grip out.
Had Corlanes in Dawson Creek rebarrel a T3x Lite 243 with an International Barrels Inc ( IBI ) 26" medium hunter contour 1:7 twist 5R, chambered in 22 Creedmoor.

Rifle weighs 9lbs 2oz with the Vortex Viper HS LR 4-16x50 w/ FFP XLR reticle in Talley tactical rings and a steel picatinny rail.
Picked up some large rifle primer pocket 22cm Alpha brass from Gary at Bighorn Sales in Houston. A .251 bushing for my Redding TypeS 6.5 Creedmoor neck die and a 22cal VLD micormeter seating stem for my 6.5cm seater die works well for making ammo. Hornady has listed a 22 Cm die set now which would be an easier route.




Quick n dirty gravel pit range test, shooting off the tail gate at 92 yards. Tried 3 different bullets, average 3 shot group was 0.65moa


Pretty happy with the results! Will run some more powder next time, these loads were pretty conservative
Cleaned the barrel and changed bolt handle, bolt shroud and grip out.
