The Freedom Ordnance FX-9 OWNERS thread.

The sad part is Freedom Ordnance don't seem to be interested in fixing the issue. There are alternatives, some of which are available in Canada.

Take Care
Bob
 
seamus said:
I’ve noticed that the new ambidextrous charging handle as an “over-insertion” tab that seems to be installed above the barrel nut under the handguard, was over-insertion ever really a problem before? I’m not sure how that would even work.
Click to expand...

I, too, have this question.

I've got a Gen2 which has the overtravel stop installed by default. The damned thing just snapped on me the other day somehow. I found it rattling around my fore-end in between the rail and barrel.

I can't find any info about what this thing actually prevents. The only thing on it is the little blurb on their site about preventing overtravel of the charging handle, but I don't understand how that could even happen, really.

I can't find any instructions on how to install or remove the thing either. Waiting on a response from support.
 
Just an update on my FX9.
I am now running a Davinci Comp with an hydraulic buffer and the original buffer spring with the 10" upper.
The carbine now shoots dead flat with just a push for recoil. Almost but not quire identical to a light 22lr. No kidding.
I tried a heavier and slightly longer buffer spring and ended up with ejection problems causing the spent case to fail to eject resulting in a stove pipe. What happens is the bolt
Carrier group does not clear the bolt stop or fully complete the ejection cycle. The lighter spring eliminated the issue.
For those who don't compete with their FX9 running the gun stock will meet their needs. For those who compete, a decent comp and hydraulic buffer just gives you an edge over someone who is running a stock gun. Talent and stock will beat no talent and the above changes every time. I know this from experience. The difference is the bling impresses mature women Lol.
Tale Care
Bob
 
Just received my FX9. I am a first time firearm owner. I was hoping to get some Do's and Don'ts from the community and ask some questions. The manual for the FX9 gives great instructions for cleaning, but not much on operation. I did play with the gun a small bit, hoping I didn't damage it at all. I have booked some time with a range officer at my local range to go over some basics. Here's my experience so far;

-The gun comes completely dry. When I opened the box I put a few drops of Hoppes gun oil on the bolt and down the mag well. I then racked the bolt to check the chamber and when I did there was an awful feeling metal-on-metal scratching noise. The bolt locked open so I hit the bolt release and there was a smell like flint lol. Clearly two piece of metal hit together very quickly I hope this didn't damage the gun. Is there a good tutorial online for oiling the FX9, would an AR15 oiling tutorial also be acceptable?

-The safety won't switch unless the the bolt is cocked. This feels wrong but maybe that is just due to my unfamiliarity with the platform?

-The bolt release feels overly aggressive, not that I have much of a reference point, but it feels like it is damaging the gun, especially after the flint smell.

Any and all input is welcome, I'd love if someone can give me some tips or point me toward some good resources.

MMM
 
Biggest tip I can give you is that when you first fire it, do it wet. I use a generous amount of CLP to coat the bolt and smear some inside the action where the bolt moves and where the charge handle moves. This is the correct way to break it in and is still how I clean and lube it before a match. If operating the gun in the cold (winter) I'd not go so heavy on the lube as than can impede function in freezing temps. But at this time of years, I like my FX9 nice and wet.

As for the "flint" smell. I would worry about that. You can't really damage the gun by operating it, including dropping the bolt. It's just as violent (probably more so) when the gun fires.
 
toxic said:
Biggest tip I can give you is that when you first fire it, do it wet. I use a generous amount of CLP to coat the bolt and smear some inside the action where the bolt moves and where the charge handle moves. This is the correct way to break it in and is still how I clean and lube it before a match. If operating the gun in the cold (winter) I'd not go so heavy on the lube as than can impede function in freezing temps. But at this time of years, I like my FX9 nice and wet.

As for the "flint" smell. I would worry about that. You can't really damage the gun by operating it, including dropping the bolt. It's just as violent (probably more so) when the gun fires.
Click to expand...
Thanks for the response.

I plan on showing the... smell lol, to the gunsmith at the range when I take it to shoot this weekend. Hopefully its something that can be fixed or a non-issue. I will update when I have some answers.
 
MadManMilla said:
Just received my FX9. I am a first time firearm owner. I was hoping to get some Do's and Don'ts from the community and ask some questions. The manual for the FX9 gives great instructions for cleaning, but not much on operation. I did play with the gun a small bit, hoping I didn't damage it at all. I have booked some time with a range officer at my local range to go over some basics. Here's my experience so far;

-The gun comes completely dry. When I opened the box I put a few drops of Hoppes gun oil on the bolt and down the mag well. I then racked the bolt to check the chamber and when I did there was an awful feeling metal-on-metal scratching noise. The bolt locked open so I hit the bolt release and there was a smell like flint lol. Clearly two piece of metal hit together very quickly I hope this didn't damage the gun. Is there a good tutorial online for oiling the FX9, would an AR15 oiling tutorial also be acceptable?

-The safety won't switch unless the the bolt is cocked. This feels wrong but maybe that is just due to my unfamiliarity with the platform?

-The bolt release feels overly aggressive, not that I have much of a reference point, but it feels like it is damaging the gun, especially after the flint smell.

Any and all input is welcome, I'd love if someone can give me some tips or point me toward some good resources.

MMM
Click to expand...
I believe that Safety behavior is typical of AR style safeties.

I too run the gun a bit wet. Some metal on metal is ecpected at this rice level. For smooth as silk one must spend B&T GHM9 or SPC9 money.

If you intend on using hollow point ammunition with an FX-9 you need heavier bujllets. 115 grain Hollw Point bullets will jam very frequently in an FX-9 (you cna search this thread for another post of mine... I did some testing with various loads.

After adding an optic and/or iron sights the gun is essentailly good to go.

If you want to tweak the gun by using a stronger buffer spring (i.e. 308 Carbine buffer spring) and heavier buffers you get reduced felt recoil.
Again I've done some experimenting with this and it is posted in this thread.
But I think the best way to reduce felt recoil is withg a Hydraulic buffer (KynShot KYN-RB5000 is what i'm using)
Beyond that I don't like the A2 pistol grip or the supplied stock and swapped them out for BCM Mod 0 pistol grip and an Magpul stock
 
terBC said:
Has anyone tried one of the Trigger Tech AR9 duty triggers in their FX9?
Click to expand...
Triggertech has an FX9 specific trigger. It's a very nice trigger but it tends to strike on the weak side. Lots of people have experience with them so should be easy to find how it's worked for guys. Personally not sure I'd buy another one - but I'm keeping the one I have.
 
Thanks for the info I knew about the purpose built FX9 trigger. I don’t necessarily need an adjustable trigger in mine which is why I was looking at the duty trigger.

This part here on the description had me wonder if anyone had run a duty ar9 trigger in their fx9

“The FX-9 trigger is nearly identical to the AR-9 trigger design, except it has lower disconnect engagement to provide the extra clearance required by the FX-9 platform bolt carrier group. This trigger is ideal for PCC’s that have a lower bolt carrier group.”
 
toxic said:
Triggertech has an FX9 specific trigger. It's a very nice trigger but it tends to strike on the weak side.
Click to expand...

I installed a JP Roller trigger.
The FX9 OEM firing pin spring is quite stiff.
Perhaps too stiff...
I swapped the spring out for a slightly less stiff one and... She goes bang every time.
 
terBC said:
Thanks for the info I knew about the purpose built FX9 trigger. I don’t necessarily need an adjustable trigger in mine which is why I was looking at the duty trigger.

This part here on the description had me wonder if anyone had run a duty ar9 trigger in their fx9

“The FX-9 trigger is nearly identical to the AR-9 trigger design, except it has lower disconnect engagement to provide the extra clearance required by the FX-9 platform bolt carrier group. This trigger is ideal for PCC’s that have a lower bolt carrier group.”
Click to expand...
Has the stock trigger give you any issues? I run a stock trigger in my FX9 ansd it has worked out fine. A bit heavier than the trigger in my Raven9 but adequate unless you are driven to competition where we all need a "Competition Trigger" The more expensive the better.

Take Care

Bob
 
Canuck44 said:
Has the stock trigger give you any issues? I run a stock trigger in my FX9 ansd it has worked out fine. A bit heavier than the trigger in my Raven9 but adequate unless you are driven to competition where we all need a "Competition Trigger" The more expensive the better.

Take Care

Bob
Click to expand...

Thanks Bob,

No, the stock trigger hasn’t caused me any issues. I just saw that Trigger tech was having a 15% off sale and then started wondering about the ar9 duty trigger in the fx9 as have a regular duty trigger in one of my 556 rifles.

Always appreciate your insight into the FX9 platform. I’ll keep it with the stock trigger based on your experience.
 
I went with a hiperfire on my fx9, it runs flawless.. I also second the Kynshot RB5015HD, I also added 5oz of spacer in front of it, a flat wire carbine spring, and an 8" Internal length buffer tube. She shoots pretty f'ing soft.
Run it wet, clean it often, feed it 115/124grn, and get a good comp like the DaVinci diesel slant or the ones Madcow has made. They add weight and gas redirection to help with muzzle rise and dot bounce (trust me, they work well).
 
AlphaCharlieDelta said:
I went with a hiperfire on my fx9, it runs flawless.. I also second the Kynshot RB5015HD, I also added 5oz of spacer in front of it, a flat wire carbine spring, and an 8" Internal length buffer tube. She shoots pretty f'ing soft.
Run it wet, clean it often, feed it 115/124grn, and get a good comp like the DaVinci diesel slant or the ones Madcow has made. They add weight and gas redirection to help with muzzle rise and dot bounce (trust me, they work well).
Click to expand...

Which flat wire spring did you order and where did you get it from?
 
Friend let me try the Kynshot RB5015HD with stock spring and loved it! On order.
Also using a Armanov Comp.
Still mostly stock 10”
Looking forward to have some fun/learn at the Ontario Provincials
PCC/MiniRifle match.
 
Rippo said:
Friend let me try the Kynshot RB5015HD with stock spring and loved it! On order.
Also using a Armanov Comp.
Still mostly stock 10”
Looking forward to have some fun/learn at the Ontario Provincials
PCC/MiniRifle match.
Click to expand...
Yeah, I don't think I could go back to a standard style buffer now that I've run the hydraulic buffer. As a note, if you want spacers buy some 24mm stainless round stock and cut your own spacers (The Kynshot ones are $40+tax each, the stainless rod is like $10 for 10oz or 3 inches). Try 2.5oz then try a 5oz... big difference.
 
You must log in or register to reply here.
Back
Top Bottom