The most underrated catridge on the planet.

I am currently loading H4895 for 75gr ELDMs (varget would also be a good choice here)... WC735 (will switch to H335 when I run out) for the 50gr TNT for bulk shooting. I am running low on a clone of IMR8208 which I also really like for the TNT but running very low

I would never limit myself to just 2 powders.... the supply chain does enough restrictions.

The vast majority of mid burn powders were designed around the needs of a 223 so getting good performance is really just a matter of proper load work up. If you need temp stability, that limits options. If you want to make bulk on a progressive, that will also limit options.

Choose from what you can find and suits your end use goals.

Jerry
Thxs Jerry I have a LOT of different powders - it Was just for interest and conversation Sake i asked ! Have you ran IMR4895 much or at all ?
 
Last edited:
Dirt napped them with a 223 Remmy shot out of a Savage (y)

What was the load under that Bullet :unsure: ;)

Savage Predator Hunter Max 1
65 grain Sierra Game King
24.2 grain H4895
Rem 7.5 primer
Winchester and Remington brass
3050 fps average
Loaded with a Lee Hand press using collet neck resizing die.
Average group size is just under half an inch.
 
Last edited:
Back
Top Bottom