The real type 95/97 for starters. If you like the original look. Richooutdoors.c has them there, but CGN'S link isn't working for some reason. There are modifications to use a QD sling - I don't know who supplies them though. I think t97.ca was working on a solution, but it might be a while yet before there next project is out for purchase.
The T97 Thread!
- Thread starter Clobbersauras
- Start date
The new T97 shoots flawlessly. I've only put 80 rounds through it using the original mag with no problems. I purchased a 50 BEOWULF ( PCV-50 ) mag from GP tactical but my T97 does not like it. It is very loose in the magwell and the mag drops about 1/8" every time I fire a round so the next round will not feed unless I hit the bottom of the mag to push it back into place.
Well I did it. You guys convinced me I needed to be liberated from a good chunk of change for one of these suckers. Picked up a used one off Wolverine that came with 4x E-Lander magazines for less than a new one. So the question is, which one of you guys sold your T97 to Wolverine?
Was going to order it then anyway.
Truck Norris
Regular
- Location
- Elk Valley, BC
I just purchased a small pic rail and attached one to the forend . There's a seam that runs in the middle and I used that to line up the two holes . Attach pic rail and use a white grease marker through the two holes. Drill and screw with some Loctite. 2000 + rounds later and my fore-grip hasn't budged.
Take a look at airsoft stores, they may have something. You'll likely have to modify it to get it on there with anything even remotely resembling sturdiness.
If my memory serves, the original T97 shorty was part of the prohibition debacle and they were all seized, so its unlikely you'll find a legit one.
Or, do yourself a favour and take a look at the lower that the boys over at t97.ca are putting together. Theres a thread in the m14.ca forum around somewhere.
If my memory serves, the original T97 shorty was part of the prohibition debacle and they were all seized, so its unlikely you'll find a legit one.
Or, do yourself a favour and take a look at the lower that the boys over at t97.ca are putting together. Theres a thread in the m14.ca forum around somewhere.
Last edited:
