The "What Have You Reloaded Today" thread
- Thread starter Trinimon
- Start date
20 43 mauser rounds, 20 38-40win rounds, 20 25-20win, 40 44-40win and 60 303 british rounds on sunday.
the winchester ammos are model92 barrels on lee metford actions i just put together, i was just adjusting point of aim to close.
the winchester ammos are model92 barrels on lee metford actions i just put together, i was just adjusting point of aim to close.
Just trimmed and prepped 600pcs of 338LM. Will be working up some loads for a 200m ladder test this weekend providing the wind stays down. After tuning what load works best I'll be cranking them out with 330gr SMK's for 1500m shooting.
20 - 25-06 with the 100 grain Barnes TSX with RE22
12 - 25-06 with 120 grain Sierra with Re22
5 - 25-06 with 117 Sierra with IMR4831
Some for hunting and some for testing.
Installed a set of Talley rings and need to sight in too.
12 - 25-06 with 120 grain Sierra with Re22
5 - 25-06 with 117 Sierra with IMR4831
Some for hunting and some for testing.
Installed a set of Talley rings and need to sight in too.
Last edited:
- Location
- chilliwack BC.
close to 200 .223 1x fired mixed brass out of the 783.
learning about neck sizing with a Lee collet die. full brass prep on these, and primed, ready to load.
Going to go thru a few different powders. Will try Varget, 3031, Benchmark and TAC. Probably not too much testing with TAC as that seems to be better for light weight bullets and this rifle will be more for 68-74 grain pills.
learning about neck sizing with a Lee collet die. full brass prep on these, and primed, ready to load.
Going to go thru a few different powders. Will try Varget, 3031, Benchmark and TAC. Probably not too much testing with TAC as that seems to be better for light weight bullets and this rifle will be more for 68-74 grain pills.
Loading some .32 S&W Long for my GSP. Using some of my limited supply of 100 gr H&N HBWC lead bullets over 1.5 gr of Titegroup.
I was using Berry's plated HBWC bullets for practice sessions but I've noticed they no longer manufacture this type of .32 projectile.
H&N was having an issue exporting their product from Germany.
I may have to order some Lapua HBWC's from Hirsch but shipping lead across the country is expensive.
I was using Berry's plated HBWC bullets for practice sessions but I've noticed they no longer manufacture this type of .32 projectile.
H&N was having an issue exporting their product from Germany.
I may have to order some Lapua HBWC's from Hirsch but shipping lead across the country is expensive.
funnily enough I got my hands on that RCM 338 of my mates, an the bag of Brass he searched the World for 
I loaded some 180gr Woodleighs with AR2206H , ready for some Development!
some 225s will be tested an loaded shortly too but the 180 load is off to New Zealand for a week or two in November!
I loaded some 180gr Woodleighs with AR2206H , ready for some Development!
some 225s will be tested an loaded shortly too but the 180 load is off to New Zealand for a week or two in November!
- Location
- Chateauguay
I reloaded what I shot Sunday the 8th 460's ,Casull, 357,.45 and 9mm
DiabeticKripple
CGN Regular
- Location
- Red Deer, Alberta
Prepped 50 cases of .223 for loading tomorrow night. Doing a ladder test of 50gr VMAX over Varget.
The other night I did 50 .223 with 50gr Varmint Grenades over Varget.
I also measured the OAL in my 3 bolt guns as my Hornady OAL gauge came in the mail today.
The other night I did 50 .223 with 50gr Varmint Grenades over Varget.
I also measured the OAL in my 3 bolt guns as my Hornady OAL gauge came in the mail today.
Put together 30 rounds of 6.5 Creedmoor for my Modern Hunter. 129gr SST over 38.1gr Varget. Loaded to book COL from Hornady #9.
Made 5 of each at 37.9, 38, 38.1, and 38.2 last week for final testing and again 38.1 gave tightest group on paper even though 38gr gave more consistent velocity according to the old chrony. I may need to upgrade the chronograph one of these days.
I seem to at least have my hunting load worked out now, these are grouping right around 1 moa. I think the rifle can do better but is being held back by me and thinking maybe I should try some 4350 but since I have a lot of Varget around I'll stick to this load and move on to finding a load for my M305 and also loading up more 139gr SST's over Varget for my 7-08 hunting rifle. I'll come back to the 6.5CM at a later time for more fine tuning.
Made 5 of each at 37.9, 38, 38.1, and 38.2 last week for final testing and again 38.1 gave tightest group on paper even though 38gr gave more consistent velocity according to the old chrony. I may need to upgrade the chronograph one of these days.
I seem to at least have my hunting load worked out now, these are grouping right around 1 moa. I think the rifle can do better but is being held back by me and thinking maybe I should try some 4350 but since I have a lot of Varget around I'll stick to this load and move on to finding a load for my M305 and also loading up more 139gr SST's over Varget for my 7-08 hunting rifle. I'll come back to the 6.5CM at a later time for more fine tuning.
- Location
- Central AB
Couple hundred rounds of 303 British plinking loads with cast bullets. The Loadmaster sure makes cranking out bulk ammo a whole lot easier.
