++UPDATE Dec 22/ 21++ Kel Tec CMR-30 with Dlask Arms Barrel now NON-RESTRICTED !

With an offering like this, these would sell easily without the need to call out other companies - especially since IRG doesn't have any coming down the pipeline. It was a little bit of an unnecessary move but if Dlask comes through and just continues to make good products they do sans the name calling, this whole thing can be put behind them right quick.
 
With the previous ruling about muzzle devices they should be able to just stick on a fake can on the original barrel that extends the gun to be over 26" and now non restricted. That ruling that was posted here says it doesnt even have to be permanent. That would be cheap and easy as long as the lab remains consistent and they are far from consistent. Hopefully Dlask can get this straightened out with the lab rats and everyone will have a happy ending.
 
Dlask Arms said:
So we were playing with a CMR-30 here and decided to make a new barrel for it to make the OAL to 26.25" meaning - Non-Restricted.

Unlike the ones brought into the country by another vendor as N/R that are actually not (because pinning the stock is not an accepted method per the RCMP SFSS) these are truly N/R.

Question is ; would there be interest in us producing more of these for sale or is this little unicorn just for me ? ( :


Against a factory CRM-30 :

View attachment 423008

Drop a fake can her and she'll brighten right up ! Voila !

View attachment 423010
Click to expand...

w8zAATP.jpg


Pretty ironic isn't ...
 
Some of the recent interpretations of vague legislation are annoying enough..... mud slinging between industry players is counterproductive.
 
I think it's clear a pinned stock wouldn't allow for an FRT. The barrels going to help get one.

The gsg already had NR status so it's less risky with a pinned one in the bush if it gets looked up.

I'm personally not comfortable with a superglue/jb/screw mod foldy boi subject to an individuals interpretation on being "permanent". It's grey zone go down that road at your own risk.
 
super_sharp_shooter said:
I think it's clear a pinned stock wouldn't allow for an FRT. The barrels going to help get one.

The gsg already had NR status so it's less risky with a pinned one in the bush if it gets looked up.

I'm personally not comfortable with a superglue/jb/screw mod foldy boi subject to an individuals interpretation on being "permanent". It's grey zone go down that road at your own risk.
Click to expand...

Wow, someone who's been on here since 2012 is calling a gun a "boi". I thought that was a kid's thing.
 
Lookingforantiques said:
Wow, someone who's been on here since 2012 is calling a gun a "boi". I thought that was a kid's thing.
Click to expand...
Gsg16 is "Bubba's" Nephew. I hate it. TUFF-22 now we're talking.

DLASK brought up the inconsistencies in an earlier post. If a rivet is somehow good enough to "permanently" limit mags it should also be good enough to "permanently" fix length and allow reclassification from R > NR. But it wasn't. They provided proof that its not consistent and some interpret rules differently. If it is already classified as NR I wouldn't sweat the pinned stock so much. I tend to worry so I stay away from these issues all together and just get a fixed stock or longer barrel.
 
Last edited:
Seen a few mentions from Dlask of interesting NR barrel projects that garnered a lot of interest. Are any of these going to be reality or just more wishful thinking?
 
Trapanese said:
Seen a few mentions from Dlask of interesting NR barrel projects that garnered a lot of interest. Are any of these going to be reality or just more wishful thinking?
Click to expand...

Anything is possible. My 3rd grade teacher told me that.

The reality is that we have made lots of N/R barrels for cool projects. Unfortunately the RCMP are being difficult and not allowing us to add a child entry to the FRT list for our creations. Take this CMR-30 for example. They told us if we want a N/R child entry then we have to submit the rifle for inspection. I explained that we simply made a longer barrel the same as we already do for a bunch of other pistols & rifles. It is an accepted method for adding to OAL. I even sent pics of the before and after with a tape measure on it as well as a stock rifle next to the new longer barreled version. I thought I had made the case....idiot proof. Nope, you have to send it in for inspection they said.

Well if they can't understand that we are only adding to the OAL of the gun by making a longer barrel (which we are well known for) then they are not the 'Experts' they claim to be. Even my 7 year old can add simple numbers like : if the original barrel is xx long and we add xx inches to the new barrel then how long will the OAL be when installed ?

It seems the F-N Timbits at 'The Lab' are not as smart as my 2nd grader and cannot do the math without seeing it in person. Or, my biased assumption, they know that another round of bans is close at hand and they are holding out from letting as many N/R platforms onto the market as they can until the chop comes.

Going back down my rabbit hole now, talk later.....
 
Dlask Arms said:
Anything is possible. My 3rd grade teacher told me that.

The reality is that we have made lots of N/R barrels for cool projects. Unfortunately the RCMP are being difficult and not allowing us to add a child entry to the FRT list for our creations. Take this CMR-30 for example. They told us if we want a N/R child entry then we have to submit the rifle for inspection. I explained that we simply made a longer barrel the same as we already do for a bunch of other pistols & rifles. It is an accepted method for adding to OAL. I even sent pics of the before and after with a tape measure on it as well as a stock rifle next to the new longer barreled version. I thought I had made the case....idiot proof. Nope, you have to send it in for inspection they said.

Well if they can't understand that we are only adding to the OAL of the gun by making a longer barrel (which we are well known for) then they are not the 'Experts' they claim to be. Even my 7 year old can add simple numbers like : if the original barrel is xx long and we add xx inches to the new barrel then how long will the OAL be when installed ?

It seems the F-N Timbits at 'The Lab' are not as smart as my 2nd grader and cannot do the math without seeing it in person. Or, my biased assumption, they know that another round of bans is close at hand and they are holding out from letting as many N/R platforms onto the market as they can until the chop comes.

Going back down my rabbit hole now, talk later.....
Click to expand...

So are you going to be sending a sample to the lab or you figure it's not worth the effort? I assume it would be at least a year long wait if you did. A NR CMR-30 has been on my wishlist for a long time and I would do dirty, dirty things to you if you made my dream come true (I'd also pay you instead, if you're into that kind of thing).
 
Dlask Arms said:
Anything is possible. My 3rd grade teacher told me that.

The reality is that we have made lots of N/R barrels for cool projects. Unfortunately the RCMP are being difficult and not allowing us to add a child entry to the FRT list for our creations. Take this CMR-30 for example. They told us if we want a N/R child entry then we have to submit the rifle for inspection. I explained that we simply made a longer barrel the same as we already do for a bunch of other pistols & rifles. It is an accepted method for adding to OAL. I even sent pics of the before and after with a tape measure on it as well as a stock rifle next to the new longer barreled version. I thought I had made the case....idiot proof. Nope, you have to send it in for inspection they said.

Well if they can't understand that we are only adding to the OAL of the gun by making a longer barrel (which we are well known for) then they are not the 'Experts' they claim to be. Even my 7 year old can add simple numbers like : if the original barrel is xx long and we add xx inches to the new barrel then how long will the OAL be when installed ?

It seems the F-N Timbits at 'The Lab' are not as smart as my 2nd grader and cannot do the math without seeing it in person. Or, my biased assumption, they know that another round of bans is close at hand and they are holding out from letting as many N/R platforms onto the market as they can until the chop comes.

Going back down my rabbit hole now, talk later.....
Click to expand...

Is it possible to rebarrel a 22lr GSG16 to a 22WMR?
 
You must log in or register to reply here.
Back
Top Bottom