WK180 Gen 2 builds

70F45563-A107-4C26-BE5F-62D23FBE6686.jpg

Here's the plan for mine so far, ignore the AR receiver, they're visually close enough for it to work.
 

Attachments

  • 70F45563-A107-4C26-BE5F-62D23FBE6686.jpg
    70F45563-A107-4C26-BE5F-62D23FBE6686.jpg
    18.5 KB · Views: 835
Bman12456 said:
BCM KAG is the KING of foregrips for rifles with long handguards IMO.
Click to expand...

I ended up getting the kag, just trying to figure out the best position for it - do you have any suggestions on stocks? I'm not a fan of the "minimalist" stock on it - thinking magpul CTR or STR, I want something to add some weight to the rear end. Also HAVE to switch out the A2 grip immediately, I aboslutely hate it. Probably end up going with the K2
 
9host said:
I ended up getting the kag, just trying to figure out the best position for it - do you have any suggestions on stocks? I'm not a fan of the "minimalist" stock on it - thinking magpul CTR or STR, I want something to add some weight to the rear end. Also HAVE to switch out the A2 grip immediately, I aboslutely hate it. Probably end up going with the K2
Click to expand...

Im partial to BCM on most stuff. BCM Gunfighter stock as well ad the BCM SOPMOD stock are good options. The B5 Systems SOPMOD stock is great as well. Only magpul stocks I really have experience with are the SL and SL-K both of which I'd also highly recommend.

K2 is a great grip. My favourite Ive found for grips thus far is the BCM Gunfighter MOD 0
 
If you're running a buffer tube anyways, would a weighted buffer spring balance the front heaviness of a Gen 2 or Sentinel? Or does anyone have some other idea with the buffer tube or another kind is stock?
Some people value balance more then weight reduction.
 
Bman12456 said:
Im partial to BCM on most stuff. BCM Gunfighter stock as well ad the BCM SOPMOD stock are good options. The B5 Systems SOPMOD stock is great as well. Only magpul stocks I really have experience with are the SL and SL-K both of which I'd also highly recommend.

K2 is a great grip. My favourite Ive found for grips thus far is the BCM Gunfighter MOD 0
Click to expand...

i was considering a BCM grip but it looks like it leaves a gap on the gen 2 where the magpuls are apparently flush. I feel like that would bug me at some point
 
Has anyone here installed a drop in AR15 trigger into their gen 2 yet? I can't seem to find anything definitive. Looks like the first gen accepts triggertech with some slight mods but can't find anything on gen 2.
 
H2000 said:
Has anyone here installed a drop in AR15 trigger into their gen 2 yet? I can't seem to find anything definitive. Looks like the first gen accepts triggertech with some slight mods but can't find anything on gen 2.
Click to expand...

The lower now takes AR-15 trigger pins, so I suspect it should work with more triggers the Gen 1 if anything.
 
Can someone confirm if a gen 2 upper will fit on a gen 1 lower?
I know there’s an additional pin, but will it work without it? Pictures would be great.

Thanks
 
I think there was a vid on here recently, it fits but it’s really tight, maybe to tight? Or something of that nature.
 
Just got a gen 2 on the way and excited to send my first rounds down range! I have a spare scope sitting on the shelf its a 4x16-50 does any one have any photos of a scope similar on theirs?
 
What are the odds that the OIC amendments are going to characterize this rifle as banned with the others?
 
You must log in or register to reply here.
Back
Top Bottom