XCRs in 6.8

Would you like to see a bunch of 6.8s hit the Canadian market?

  • Heck yeah!!! Send as many as the Might State Department allows!

    Votes: 150 53.0%

  • No need for rifles - send us kits!

    Votes: 32 11.3%

  • Would prefer another caliber... (please specify)

    Votes: 101 35.7%
  • Total voters
    283
Now I'm wondering why no firing pin in the kit.

And the "extractor detent and spring" isn't on Terra's diagram, is there another name for it?

John's parts kit with Terra's diagram numbers.
#1 Spring guide clip,
#2 buffer,
#5 hammer & trigger spring,
???extractor detent and spring???
#8 firing pin retaining pin and spring.


Terra's parts.
partslist-1.jpg
 
Correction: Extractor spring and detent should read Extractor spring T-slot and T-slot extractor cone, part numbers are correct. No firing pins as this was what we were advised to order for a "spares kit".

Caliber conversion kits, nothing available yet, yes when we have 6.8 mm rifles in country we will order .223 kits but until then there is no requirement so we will concentrate on complete rifles. As for 7.62 x 39 kits, these are nasty evil kits that will not be approved for export!!
 
Too bad a big selling point when I purchased this rifle was that the future would hold conversion kits. I guess I should have waited on the 6.8 and then got the .223 conversion. :bangHead:
 
Mr Wolverine said:
Correction: Extractor spring and detent should read Extractor spring T-slot and T-slot extractor cone, part numbers are correct. No firing pins as this was what we were advised to order for a "spares kit".

Caliber conversion kits, nothing available yet, yes when we have 6.8 mm rifles in country we will order .223 kits but until then there is no requirement so we will concentrate on complete rifles. As for 7.62 x 39 kits, these are nasty evil kits that will not be approved for export!!
Click to expand...

Thanks for clearing that up John.
 
I have only seen the XCR's being sold here in Canada with the fixed stock. Anyone know where a person could buy the AR type stock or at minimum a folding stock? Are there any reliability issues with this firearm? Finally, when is the 308 version going to be ready for delivery???
 
Terra

Have you guys considered entering into an agreement with a Canadian company to manufacture the stock adaptors North of the 49th? You can't mail them across but what says you can't beam the CAD/CAM info to a guy with a 4 axis CNC rig.

Shainline, you thinkin' what I'm thinkin'?
 
You must log in or register to reply here.
Back
Top Bottom