Get it non-restricted and I'll buy 2 to support your company, as well as an M6A2 in 5.56.
+1 same here ...
Get it non-restricted and I'll buy 2 to support your company, as well as an M6A2 in 5.56.
Cap 325,
Agreed if this rifle is classified as non restricted. If not...
The piston.
1)Advantage cleaning and life of the parts in the receiver.
Disadvantage
1)A .308 is a DM weapon so the real advantages of the piston design won't be used. IE fast shooting semi auto or full auto.
2) Possibly not as accurate (there is speculation that the piston by design creates barrel harmonics etc, thereby making them slightly less accurate)
3) More parts, more cost and more things to go wrong.
As for the rails.
Disadvanges
2) No real use for a .308 DM weapon
Steady reliability as well. 308 AR's are notoriously unreliable ever since they stopped following the real AR10.
Just because you decide its a DM because thats how you use yours isn't relevant. G3's and FAL's have been used as assault rifles for a very long time and still are to this day. With a standard contour barrel this gun will be no different.:
Speculation by people with DI gas systems. Its also speculation because the comparisons are 0.1" differences:
When was the last time you remember a gun going WRONG because it HAD a piston?:
I guess you know better then the US and Canadian armed forces![]()
The .308 is currently used as a DM weapon by the Canadian military.
At one time muskets were king, perhaps you could find some militia in a 3rd world country to help support the point that it's a "good" modern military weapon.
Times change. There are advantages to the .223 just as there are with the .308. The current theory is that the .223 while being lighter, allowing more ammo etc is more suitable for the general duties of today's "modern" soldier rather than the .308. The .308 has been serving as a DM marksman weapon for this exact reason rather than the mainstay. Police forces have also been using the .308 for a similiar purpose/reason (RCMP .308 winchester M70).
You don't see the crazy rail systems like the ones on the pictures above with Canadian rifles. Small spot at the fronts for extras but again most likely to be practical with the .223. Especially the CQB. Even the rails on Canadian guns aren't open designed like the ones above. Nor do they go the entire length of the rifle. If you look at the C7CT or C8CT you don't see lots of rails.
12.5" is the way to go!
Scarecrow, it's the role the military is using for the .308 for a reason. So I guess the tables are reveresed on that one, because you seem to know better than the military.There you go I'll even use the same symbol you did.
Have you even fired a .308 AR? I ask because you're insulting posts really tell me that you've never even picked one up. Go try one out, compare it to the .223 in weight, recoil etc. Also give a 9mm a try. You'll probably come to the same conclusions that 9mm awsome for tactical entry situations, .223 decent all around, .308 excellent for DM operations. The same concepts that the military and police have been using for a while now.
Again if you haven't picked one up, please don't try to insult me. I really get the feeling Scarecrow that you haven't.
Absoluty the weapon can be used for other purposes. I can hunt Prairie dogs with a .338. It's going to get expensive and isn't really appropriate for the job but I can do it. Still the .204, .223, 22-250 would be
1) a lot more fun
2) a more appropriate firearm/cartridge
3) Less expensive
You guys have fun with that 12.5"![]()