The SL8 Mods, Info and FAQ Thread

Teapot said:
I was under the impression there is a drop in G-36 look-alike receiver like one would buy for a 10/22 or a Lee-enfield.
Click to expand...


LOL no. There are G36 style lowers that you can buy for around the $500 mark but other then that you will need to have your reciever cut and mated to an actual G36 stock block and that aint cheap.
 
I'll add this to the mix:

TBostic stock, I love it! Everything the factory stock should be.

HPIM0565.jpg


HPIM0566.jpg


And thumbscrews/single point sling mount.\

HPIM0568.jpg
 
Suprathepeg, where did you get the single point mount. The stock looks good and mine should look the same in a couple weeks. Any problems moving the trigger group.
 
Trigger group is easy, just take your time. Single point mounts/thumbscrews came from the EE on hkpro.com I can't remember off hand who makes them.
 
Got my Tbostic stock and after a couple hiccups installing the trigger group we are good to go.Excellent piece of work by Tom.
100_2091a.jpg
 
That makes 2 of those stocks in Winnipeg and maybe a total of 2 in the country, nice Bob. You should add an aluminum sight rail to that SL8, which I can help you with, PM me ;-) .
 
Here is the genaral info about the SL8. It is from HK-usa web site. Red info has been added by me.
http://www.hk-usa.com/rifles_sl86_general.html

Date codes:
A B C D E F G H I K ( "J" is not used)
0 1 2 3 4 5 6 7 8 9

example: AH = 07 (2007)

LOP for SL8, G36 and stock block conversions

Actual HK G36C LOP 12.75in / 32.385cm
Actual HK G36E LOP 13.75in / 34.925cm

SL8 with stock block and G36 C stock 13.75in / 34.925cm
SL8 With stock block and G36 E stock 14.75in / 37.465

Standard SL8 LOP can be adjusted from 13 to 15 in / 33.03 to 38.1cm

THE SL8-6 RIFLE

A truly revolutionary new rifle—the HK SL8-6 is constructed almost entirely of a reinforced carbon-fiber polymer. Based on the current combat-tested German Army G36 rifle, the SL8-6 uses a proven short stroke, piston-actuated gas operating system, well known for simplicity and reliability. Designed and engineered to deliver exceptional shooting performance, the SL8-6 is already a favorite among European rifle shooters, due in large part to the many modular sighting systems available. These modular systems include extended and short Picatinny rail mounts. The ergonomic and clean lines of the HK SL8-6 are functional and modern, giving the SL8-6 the look and feel of 21st century firearm.


Specifications

Classification: NON-Restricted
Caliber: .223 Remington (unofficially 5.56 NATO, this caliber was listed in the first generation SL8 manual. Its no longer listed, but presumed to be safe. Use at your own discretion/risk.)
Principle of Operation: gas operated system with rotating bolt head

Dimensions:

Length 38.58" - 40.55" ( depending on the number of buttstock spacers you use )
Barrel length: 20.08"
Weight: 9.26 lb

Other Specifications

Capacity: 10 rounds (5 rounds Canada)
Trigger Pull: approx. 18 N (4 lbf )

SL8-6 Features

-Ergonomic black thumbhole stock, with slimline USC type forend
-Free floating cold-hammer forged heavy barrel for optimal accuracy
-Bolt cocking handle swivels to both sides of the rifle for true ambidextrous use
-Short aluminum mounting rail ( SL8-4 polymer rail. SL8-5 Long polymer rail )
-Ambidextrous safety/selector lever
-Easy disassembly for simple cleaning and maintenance
-Adjustable cheekpiece and buttstock
-Polymer 10-round magazine ( 5 round Canada. Cannot be disassembled)
-Simple, reliable short stroke, piston-actuated gas operating system
-Molded-in hard points for mounting accessories
-Lifetime warranty
Click to expand...
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom