10/22 photos - post 'em up here!

008-6.jpg


My International 10/22
 
Thanks Kenguitarz..
Both are home builds.
#9 is my version of a Ruger 10/22 VLEH
#11 is a 10/22 build using a thumbhole Turkish Walnut Apache Tomahawk stock
 
10/22s

New member to the 10/22 craze,recently came into these two fine rugers.
000_0617.jpg

I have to say the black one with the red dot is a blast to shoot. I can tell it is going to see a lot of use.
haven't shot the full stock one yet.
 
Hq3ug.jpg


This one has been a spare parts build of sorts. I got a Dlask reciever and barrel combo of the EE, and have always wanted to put a .920 barrel on a DSP stock. So i did.
The Ruger DSP stock i sanded out the barrel channel to fit the new barrel, it`s free floated untill the last half inch. A sheet of paper just gets snug at the end but can be pulled through.
The finish was removed and it was stained and tru-oiled.
Dlask 20` fluted barrel with thread cap.
OEM Reciever.
OEM trigger internals i polished out.
Bolt has a titanium power customs extractor.
Tuffer buffer.
Tac Sol 0 MOA rail.

Full size image
http://i.imgur.com/e2IOO.jpg
 
This is where all the spare parts came from. This started life as a Standard Ruger DSP.

vYhpA.jpg

D1TJr.jpg


The only Ruger part left on this Rifle is the rear sling swivel.
Dlask Reciever it`s a early model as the ser# is 23.
Dlask 16.5 X-Treme barrel with Reworked lavang Comp.
Timney full Trigger group.
Rimfire Technologies Black Manganese Parkerized Bolt.
Kidd Charging Handle.
Revolution Trailblazer stock.
Tuffer Buffer.
Harris 9-11 bi-pod with pod lock.

eWd7l.jpg

hR75l.jpg

DigHY.jpg

4yFWf.jpg


This is a 25M group.
y4SD3.jpg
 
Back
Top Bottom