Browning BLR in ROUGH shape.

[dan belisle]

So I took the darn thing apart today... I see why people say not to.

I'm glad I did, there was literal mud inside of this POS. Wtf. Guy must of used it as a paddle in the marsh.

What's crazy to me is that they dont have timing marks on the spur gears... would help with assembly, even at the factory.

I will try to figure that out so its easier in the future to clean.

I stuck the bore scope in to try to see how the barrel is threaded into the extension, but still have no idea.

I'm definitely worried about the bore picking up a lot of copper and creating higher pressures after 20 rounds.

Do yourself a favor and mark them when you're disassembling. Like timing gear marks. Once it's cleaned and lubed and back together try shooting it. You may be surprised. - dan

 

[boxhitch]

RED LOCTITED the hammer pin

remember, almost all thread lockers turn soft with heat

 

[Restoule]

remember, almost all thread lockers turn soft with heat

Yea, I started using heat, but heat will turn black anodizing purple or brown. I realized the flame was directly on the anodizing and stopped.