C8

2bore said:
Nice upper! Are you going to get it refinished? Or are you going to leave it as is?
Click to expand...

I really dont know, im on the fence on this one, i really like the fact that the wear is due to it actually been used, it has an air of authenticity, but on the other hand i could easily get this refinished. I really dont know.

One thing I really love is the weight, holy this thing is really well balanced on this cc 15.7 with the vltor stock.
 
mikethebike said:
I really dont know, im on the fence on this one, i really like the fact that the wear is due to it actually been used, it has an air of authenticity, but on the other hand i could easily get this refinished. I really dont know.

One thing I really love is the weight, holy this thing is really well balanced on this cc 15.7 with the vltor stock.
Click to expand...

Yes those are nice stocks! I usually put that or a Command Arms stock saddle on mine. Looks like you might just have to buy another. Simon at SJ Hardware mentioned he might be getting another batch... I'm definitely buying 2! Won't miss it this time!
 
mikethebike said:
I really dont know, im on the fence on this one, i really like the fact that the wear is due to it actually been used, it has an air of authenticity, but on the other hand i could easily get this refinished. I really dont know.

One thing I really love is the weight, holy this thing is really well balanced on this cc 15.7 with the vltor stock.
Click to expand...

My son and I are playing with the C8 upper and some lowers. I'm really warming up to it...it's a very nice compact length. I'm only changing the charging handle as the surplus one I bought comes in 3 different shades of grey, including parts coloured with a black sharpie.
 
Well I just couldn't help putting a CQB upper together with the extra parts I had.

I don't think Diemaco ever produced this configuration with an A1 upper but I had to give it a shot to see how I liked it.

PELZ5893 (2).jpg
 

Attachments

  • PELZ5893 (2).jpg
    PELZ5893 (2).jpg
    49.1 KB · Views: 628
Grizzly Adams said:
If you look at the front sight the arrow will be there but not the word "up" since it was not bilingual and was deleted from the CF TDP.

Only in Canada. Guess the French wouldn't understand. :)
Grizz
Click to expand...
Same with the rear sight, the R is missing. On early Colt supplied C H uppers you can see where it was taken off with an end mill. The Diemaco forgings never had the R to begin with.
 
Dsiwy said:
The staking on the bolt carrier was done by a wpns tech and the middle centre punch mark indicates ejector spring update completed.

The CAF is too cheap to buy us proper gas key stalking tools :p
Click to expand...

Good to know. I was issued an original C8 in Haiti in 96-97 and we had a lot of ejector related stoppage. We did get the ejector springs changed after every 1K rounds or so. That solved the issue. I would have never expected to have so much range time on tour!
 
Leg said:
Same with the rear sight, the R is missing. On early Colt supplied C H uppers you can see where it was taken off with an end mill. The Diemaco forgings never had the R to begin with.
Click to expand...

I was wondering about this. I have an old beat up CH forge code upper that has the R milled off and then is hand stamped with an R back in the little circle the mill left. I should strip it and fill in the stamped R and re-finish it for an early 0.625" FSB C8.
 
tripoli99 said:
My son and I are playing with the C8 upper and some lowers. I'm really warming up to it...it's a very nice compact length. I'm only changing the charging handle as the surplus one I bought comes in 3 different shades of grey, including parts coloured with a black sharpie.
Click to expand...

I put my spare raptor on this one, but I find it too big, I'll put my bcm on it later. I really dislike the cc charging handles so I didnt buy one.
 
Leg said:
Same with the rear sight, the R is missing. On early Colt supplied C H uppers you can see where it was taken off with an end mill. The Diemaco forgings never had the R to begin with.
Click to expand...

Is this how it would of looked if an R wasn't re-stamped in there?

IMG_2768.jpg

IMG_2769.jpg
 

Attachments

  • IMG_2768.jpg
    IMG_2768.jpg
    36.3 KB · Views: 672
  • IMG_2769.jpg
    IMG_2769.jpg
    71.1 KB · Views: 668
Got mine, very happy. Clear scuffs and minor signs of wear but no corrosion or carbon build up.

A couple of years ago, I had a 14.5" barrel turned to C8 specs, refinished then installed on an A1 upper with a Colt CH and Diemaco BCG. It later mated to a CC/Diemaco lower with CC guts and an early C8 Colt aluminum vinyl acetate stock. I figured that was as close to a C8 as I could get, until now. What to do with that upper now???

C8 upper top, clone bottom for comparison:

20170314_205128.jpg


20170314_205053.jpg


C8 upper on CC/Diemaco lower, Colt stock.:dancingbanana:

20170314_205028.jpg


20170314_204949.jpg
 
derrob7 said:
Is this how it would of looked if an R wasn't re-stamped in there?
Click to expand...

Could be. My example goes a little deeper so it's a perfect circle. Interesting upper you have. It looks like it was anodized after it was restamped? So maybe it never made it to Diemaco and Colt stamped the R in so they could use it?

image_zpsiw5f5nkb.jpg
[/URL][/IMG]

As for jman and 8 ball.... I'm sure you guys could easily sell those uppers/barrels to someone who can't afford or find one of these surplus ones. Or you could use the barrel for a C8A1 clone.
 
Leg said:
Could be. My example goes a little deeper so it's a perfect circle. Interesting upper you have. It looks like it was anodized after it was restamped? So maybe it never made it to Diemaco and Colt stamped the R in so they could use it?

URL]


As for jman and 8 ball.... I'm sure you guys could easily sell those uppers/barrels to someone who can't afford or find one of these surplus ones. Or you could use the barrel for a C8A1 clone.
Click to expand...

image_zpsiw5f5nkb.jpg
 
You must log in or register to reply here.
Back
Top Bottom