How to buy a barrel tuner?

I think it’s up to the individual do enough testing to make their own conclusions as to if they work. I do know for a fact, some top shooters do use and adjust them during a match. One USA shooter was losing until he adjusted his, then he was on fire afterwards and won. I am on a forum that he is in and asked him if he adjusted it since it was not disclosed in the recorded video. I am not proficient at tuner adjustments yet.
 
bigHUN said:
I would welcome some education with this, please.
I know what the tuner does, I have two barrel tuners on my BR target airguns.

This barrel what I have is a 28" heavy, full length tapered in W308, not threaded.
Measuring 0.915" at the muzzle. Only marking on the barrel is an engraving "308 Obermeyer", the chamber has tighter specs I guess.

Anything exist off the shelf I shall be looking for, or the tuner would be custom built?
I am not educated enough to know how to search for it.
Not sure if I want an integrated muzzle brake, unless removable.
Click to expand...
Google Que Industries tuner/muzzle brakes. - dan
 
Chewing this OP for several days already, have learned a lot how to search further with keywoards.
I am very surprised howcome nobody came up with a slip on clamp on gizmo yet for CF's without a need to take the barrel to a gunsmith for machining a thread.
Airguns have these, archery has these vibration dampeners ....
 
bigHUN said:
Chewing this OP for several days already, have learned a lot how to search further with keywoards.
I am very surprised howcome nobody came up with a slip on clamp on gizmo yet for CF's without a need to take the barrel to a gunsmith for machining a thread.
Airguns have these, archery has these vibration dampeners ....
Click to expand...
As I already mentioned, Google Que Industries brake/tuner. - dan
 
I have seen couple clamp on tuners, mostly made by US businesses, requiring to send them by barrel measurements and the lead time 8-10 weeks.
With that much effort and timing I can just visit my local CNC lathe shop and diy.
 
Remington 40x 40XB riflestocks used to have them built into the stocks
Mostly on single shot one’s
Basically adjustable by a big screw on each side of the forend of the stock
They apply pressure to the barrel
I have one or two extra one’s
 
Last edited:
can14 said:
Remington 40x 40XB riflestocks used to have them built into the stocks
Mostly on single shot one’s
Basically adjustable by a big screw on each side of the forend of the stock
They apply pressure to the barrel
Click to expand...
The Martini International as well had bedding screws set into it, and if I am not mistaken, so did the 52 Winchester.
Cat
 
You must log in or register to reply here.
Back
Top Bottom