Savage Model 10TR, 308 WIN, 24" Barrel, Military/LE Promo Only

Status
Not open for further replies.
Yup and she shoots .5 to .75 moa steady
175gr Berger tactical
42.5gr H4895
Gm210m primer
Stretched her to 1020yds yesterday in 15mph wind
couldnt see trail or impacts until we went to target
I was 2moa low
also got a gopher at 450yds took a few rds little bastard
wouldnt sit still to die haha
I love this rifle
powerbaitron said:
Anyone out shooting their 10 TR?
Click to expand...
 
I'm on my second one. First rifle had a scratched tang and mangled threads for the scope rail. Exchanged it, and the second one has the same issue with the threads. Seems like QC is taking a back seat at the end of the production run...
 
kozachok said:
I'm on my second one. First rifle had a scratched tang and mangled threads for the scope rail. Exchanged it, and the second one has the same issue with the threads. Seems like QC is taking a back seat at the end of the production run...
Click to expand...

Did your rail come installed? Mine did not. Maybe the factory installer (on occasion) is buggering them up.
 
Mine came installed and it took some drilling, and a larger headed hex head hammered into the enlarged hole to turn them out. But I switched to a 20 MOA rail anyways, so I wasnt overly worried about losing out on a couple screws
 
Haha using 175gr .308, none of us like gophers, but damn that must be quite the mist when you hit them.

bucktomcat said:
Yup and she shoots .5 to .75 moa steady
175gr Berger tactical
42.5gr H4895
Gm210m primer
Stretched her to 1020yds yesterday in 15mph wind
couldnt see trail or impacts until we went to target
I was 2moa low
also got a gopher at 450yds took a few rds little bastard
wouldnt sit still to die haha
I love this rifle
Click to expand...

I have tested a few work ups on mine as well and been getting around the same .5 to .75 MOA. Now that my Vortex Viper PST has arrived, I'm ready to see what kind of results I get as I push out to further distances
 
koesdibyo said:
Mine came installed and it took some drilling, and a larger headed hex head hammered into the enlarged hole to turn them out. But I switched to a 20 MOA rail anyways, so I wasnt overly worried about losing out on a couple screws
Click to expand...
Which rail did you go with and where did you order from?
 
berger said:
Did your rail come installed? Mine did not. Maybe the factory installer (on occasion) is buggering them up.
Click to expand...

My rail came in a bag on both rifles. It's a hassle more than anything, especially when I unbox this beautiful rifle, then have to wait to see how it will look all put together.
 
Finally got mine out today. First time shooting my reloads too. The results couldn't have been better. Best group was 0.550". Looks like I got a good one.

41gr of IMR 4895 pushing a 168gr berger.
136d1e1e72b9edbf1aa7b1bd3ab6f71c.jpg
 
Well second rifle got tested today. Mounted a night force scope and rings, and it turns out that as best as we can figure out, the holes for the rail have not been drilled straight. There is no way to alight the reticle with the point of impact... The adjustment bottoms out around 14MOA short of where it needs to be. Double and triple checked, no dice. Had a friend in the business look it over, no dice.

This is my second 10TR with issues. While SFRC exchanged the first one, this one, I was told "Here's the number for the warranty centre."

This seems to be an issue for an entire batch of rifles.
 
Status
Not open for further replies.
Back
Top Bottom