Sterling Arms International R18 Mk3 Part 1 Review - Specifications and Initial Impressions

and? Why would bartok know that?

I think the question you should ask is have they ever made a firearm without it?

Do you know about liability and insurance for firearms manufacturers, within Canada?
I'm not asking Bartok, where did you get this from? I'm asking the audience in a forum thread which is discussing MK3.

What part of "MK3 is not made in Canada and stamped with a fictional name of untraceable UK company" has anything to do with "insurance for firearms manufacturers, within Canada"?

Are we all drunk here or what?
 
I'm not asking Bartok, where did you get this from? I'm asking the audience in a forum thread which is discussing MK3.

What part of "MK3 is not made in Canada and stamped with a fictional name of untraceable UK company" has anything to do with "insurance for firearms manufacturers, within Canada"?

Are we all drunk here or what?
Keep calm, im literally responding to your words and posts. You literally said "Who would be liable" involving a hypothetical where you lost fingers.

Its his personal review that became about him as a reviewer vs anythring else. You have an issue with stamped marking in the receiver, he has no part of that
When an out of spec bolt explodes in a rifle and takes out my fingers. Where is that mythical "Sterling Arms International, London, UK" at? Who would be liable? This #### does not work this way, ok. "STERLING ARMS INTERNATIONAL INC." Alberta provincial corp is not "Sterling Arms International, London, UK" in any shape of form. Why lower receiver is stamped this way? Why there is no UK registration or address anywhere? What the fck is this childish deception at every step of the way?
 
View attachment 830641

Forget this, shill? Curious to know if you still need knee pads with your condition? Also SAI didn't design the AKDAS Sem223. I find it hard to believe they did anything except ask the Turks to make it a side charging handle.

How do you know I'm not in the same boat?

Unlikely or you wouldn’t have made the comment. But also completely irrelevant .

Stop trying to distract and deflect. Just man up, apologize and don’t be a D bag in the future. Your parents should have taught you this as a child , but hey it’s never too late to learn.
 
And? There is no entry for MK3 there. MK2 FRT entry is for made in Canada rifle, by "STERLING ARMS INTERNATIONAL INC." which is an Alberta provincial corporation.

Am asking what "Sterling Arms International London UK" is, as stamped on MK3 which is not made in Canada.
My Mk 2 is marked Sterling, London, UK too.
Gives it that Austin Powers, international man of mystery sort of vibe to it...yeah baby, I kinda like it...

It is also stamped 'Made in Canada'
Where it was 'made' (London, UK, Alberta, Turkey) and by whom is of no consequence to me. Only that it works and there is warranty support for it. If warranty support is in Alberta as opposed to the UK, then that is fantastic.
Not sure where you are going with this or why it appears to be such a big deal to you?
 
Last edited:
My Mk 2 is marked Sterling, London, UK too.
Gives it that Austin Powers, international man of mystery sort of vibe to it...yeah baby, I kinda like it...

Where it was 'made' (London, UK, Alberta, Turkey) and by whom is of no consequence to me. Only that it works and there is warranty support for it. If warranty support is in Alberta as opposed to the UK, then that is fantastic.
Not sure where you are going with this or why it appears to be such a big deal to you?
Big deal? There is a marking on a firearm. It claims there is a "Sterling Arms International, London, UK", but it does not exist? Are you all guys for real?

To what level of insane carelessness are you all willing to go just to get a new toy? How about they are all going to be marked serial number CA0009, is it also fine with you or serial number matters but not a name of a company you cannot find a trace of? How about they put a wrong caliber designation, since apparently it is all irrelevant?
 
SAI never screwed anyone over on an R18 Mk2 during the past 2 years. In fact, most owners would probably state that SAI's customer service was responsive and quick. I highly doubt that SAI intends to start treating their customers poorly just as they launch two new flagship products.....

As for the employees, my understanding is that JR Cox went to great lengths to ensure that his staff were paid final paycheques and severance. So how exactly did he fvck over his employees? Huh? How? C''mon - you're so fvcking smart, tell us how JR Cox screwed his employees? Seriously - I really want to hear your made-up bull####e theories. The TRUTH of the matter, if you care to investigate, is that the vast majority of TSE's former employees have nothing but glowing things to say about their employer. Check your facts, as you are waaay out to lunch with your baseless accusations. Par for the course around this frigging place.

No rating, zip, nada, zilch. Just another idiot with a big yap and a second-hand grudge. Sort yourself the fvck out.....
Well seeing as I worked there up until the bitter end and that was last Monday.. this is what we were told " don't worry guys the new owners said they are keeping the front of house staff" he said that so many times to us cause we constantly asked if we should look for new jobs. And then in our last meeting which was last Monday he said he lied to us cause he didn't want the bank taking money so we wouldn't get severance. Which is bull#### not to mention he didn't tell any of the members so he wouldn't have to refund them. JR lies and lies and lies to the point of you can't believe anything he says. And if you don't believe me well we all recorded the last speech he gave us admitting he lied and was fuc$ing over members.
 
Well seeing as I worked there up until the bitter end and that was last Monday.. this is what we were told " don't worry guys the new owners said they are keeping the front of house staff" he said that so many times to us cause we constantly asked if we should look for new jobs. And then in our last meeting which was last Monday he said he lied to us cause he didn't want the bank taking money so we wouldn't get severance. Which is bull#### not to mention he didn't tell any of the members so he wouldn't have to refund them. JR lies and lies and lies to the point of you can't believe anything he says. And if you don't believe me well we all recorded the last speech he gave us admitting he lied and was fuc$ing over members.
Well that is a mighty interesting development...
 
Well seeing as I worked there up until the bitter end and that was last Monday.. this is what we were told " don't worry guys the new owners said they are keeping the front of house staff" he said that so many times to us cause we constantly asked if we should look for new jobs. And then in our last meeting which was last Monday he said he lied to us cause he didn't want the bank taking money so we wouldn't get severance. Which is bull#### not to mention he didn't tell any of the members so he wouldn't have to refund them. JR lies and lies and lies to the point of you can't believe anything he says. And if you don't believe me well we all recorded the last speech he gave us admitting he lied and was fuc$ing over members.
If you got your final paycheque and severance, you did better than many employees do in a bankruptcy proceeding. Not defending JR Cox's lies to the staff, of which I was not aware. I would imagine that he had to maintain a semblance of normalcy right up to the end in order to keep the cash-flow open for those cheques and severance. That does not excuse his lies, but it may (partiially?) explain them.

JR Cox s a polarizing figure within the firearms community, I will certainly grant you that. However, you are the first employee of his to express dissatisfaction with his leadership that I am personally aware of. All of the written staff comments that I have seen were positive, however those accounts came before the bankruptcy and closure - an event virtually guaranteed to cause great heartache all-around.

Sorry to hear that you had a negative experience with JR Cox at the end of TSE. He should not have strung you along, but instead taken the staff into his confidence on the understanding that paycheques were on the line. In any case, I wish you the best of good fortune in finding alternative employment.

Thankfully, where the R18 Mk3 is concerned, SAI is a completely separate company from TSE, headquartered in England. In that regard, the R18 is still fully financed and proceeding through testing to production. The extent of JR Cox's involvement in SAI is not clear to me, and is honestly none of my business. Obviously he is heavily involved in the R18 testing and production, so it is probably safe to say that JR currently plays a prominent role in SAI's Canadian operations. I have been assured that the TSE bankruptcy in no way impacts the R18. Everyone will be able to decide for themselves whether or not that is true in the coming months. I really hope that it is true, as I think that the Mk3 really has terrific potential for the tricky Canadian "black rifle" market. We shall all soon find out, I suppose.

My focus remains on the rifle itself and its upcoming live-fire performance. Facts, findings and logical conclusions - there will be no rumour or conjecture. Well over a week ago I arranged for a new, local CGNer to assist me with the live-fire testing. Iceman106 will set up and fetch targets, validate my groups, shoot groups of his own, assist me in diagnosing any malfunctions, and so on and so forth. He is there as a second set of eyes. Anyone on Range 1 at CHAS Genessee when I am there who wishes to try out the pre-production rifle will be welcome to do so. 1000 rounds is a lot of 5 round magazines. to load all by yourself! So those who are predisposed to doubt my findings will have iceman106's truth to contend with as well....
 
Last edited:
Does anything change with TSE's news?
Nope - still full steam ahead with live-fire testing followed by initial production runs. Just waiting on replacmement, Canadian-made Bolts that were supposed to be delivered already. The initial run of Canadian bolts were out of spec, resulting in headspace issues that rendered the 25 pre-production rifles unsafe to fire. Once the new bolts arrive, testing (including my own) will begin.
 
Last edited:
I'm not asking Bartok, where did you get this from? I'm asking the audience in a forum thread which is discussing MK3.

What part of "MK3 is not made in Canada and stamped with a fictional name of untraceable UK company" has anything to do with "insurance for firearms manufacturers, within Canada"?

Are we all drunk here or what?
It’s not a fictional UK company but rather what appears to be a dormant or shell company being used for name recognition:
https://find-and-update.company-information.service.gov.uk/company/10154095/filing-history

By the way you can find out about Sterling Arms International by doing a corporate search in Alberta. It only costs a few bucks.
 
It's a shame this thread got FUBARed lol, I just wanna see this thing run.

The Canadian market has been flooded with expensive junk for too long.

We've been coping with haphazardly engineered $2000 AR180 garbage rods made of pot metal (that we convince ourselves are dope but they're actually not) for the last couple of years and this is the first time in a LONG time where I have hope for a new CDN designed platform.

Stop killing my vibe. Go start a new thread about how much u hate JR or whatever elsewhere.

I have personally met Bartok and have been out shooting with him, and I must say this man has an incredible breadth and depth in his knowledge of firearms and their design intricacies.

He is truly the most passionate firearms mind I have had the pleasure of connecting with. And his collection? You name it, and he probably owns, or has owned it in his collection. And trust me when I say it blows your collection out of the water.

I trust his reviews personally and they have saved me many a dollar in some cases. Bartok is a true autiste when it comes to firearms design, one who appreciates the finer details. He just wants to see a good thing come true here folks.

I also happen to be a paraplegic from a mountain biking jump gone wrong. So we connect on that disabled homie level as well. It's sad to see all the azzhats on this thread who's mums never taught em how to be respectful.
 
Well seeing as I worked there up until the bitter end and that was last Monday.. this is what we were told " don't worry guys the new owners said they are keeping the front of house staff" he said that so many times to us cause we constantly asked if we should look for new jobs. And then in our last meeting which was last Monday he said he lied to us cause he didn't want the bank taking money so we wouldn't get severance. Which is bull#### not to mention he didn't tell any of the members so he wouldn't have to refund them. JR lies and lies and lies to the point of you can't believe anything he says. And if you don't believe me well we all recorded the last speech he gave us admitting he lied and was fuc$ing over members.
Sounds like a pile of bullsh1t to me. You joined yesterday? And now you have audio proof?

And you call yourself Pedophile hunter?

Are you related to Trudy socks the actual pedophile? Do you want to hunt him?

I call bullsh1t!......:)
 
It's a shame this thread got FUBARed lol, I just wanna see this thing run.

The Canadian market has been flooded with expensive junk for too long.

We've been coping with haphazardly engineered $2000 AR180 garbage rods made of pot metal (that we convince ourselves are dope but they're actually not) for the last couple of years and this is the first time in a LONG time where I have hope for a new CDN designed platform.

Stop killing my vibe. Go start a new thread about how much u hate JR or whatever elsewhere.

I have personally met Bartok and have been out shooting with him, and I must say this man has an incredible breadth and depth in his knowledge of firearms and their design intricacies.

He is truly the most passionate firearms mind I have had the pleasure of connecting with. And his collection? You name it, and he probably owns, or has owned it in his collection. And trust me when I say it blows your collection out of the water.

I trust his reviews personally and they have saved me many a dollar in some cases. Bartok is a true autiste when it comes to firearms design, one who appreciates the finer details. He just wants to see a good thing come true here folks.

I also happen to be a paraplegic from a mountain biking jump gone wrong. So we connect on that disabled homie level as well. It's sad to see all the azzhats on this thread who's mums never taught em how to be respectful.

This!

Thank you tonykimatpl!......:)
 
It’s not a fictional UK company but rather what appears to be a dormant or shell company being used for name recognition:
https://find-and-update.company-information.service.gov.uk/company/10154095/filing-history

By the way you can find out about Sterling Arms International by doing a corporate search in Alberta. It only costs a few bucks.

Are you for real?

"STERLING ARMAMENT COMPANY LIMITED" UK Company number 10154095

is NOT

"Sterling Arms International, London, UK"

is NOT

"STERLING ARMS INTERNATIONAL INC." CALGARY, AB, 2020897639
 
Back
Top Bottom