uh, not sure.. I'd have to look. I used the paints for lead/pweter 1.5" figurines. I'll snap a pic of the kit I got off amazon.
The Stag 10s NR stripped receiver set thread
- Thread starter jiffx2781
- Start date
uh, not sure.. I'd have to look. I used the paints for lead/pweter 1.5" figurines. I'll snap a pic of the kit I got off amazon.
Tester model paint works well. Matt (flat) white and fire engine red look decent . Use acetone not paint thinner. Do a thin coat, let dry. Then a heavier coat, let dry. Don’t spent too much time worrying about being in the lines. A rag with acetone will wipe off the paint not in the engraving. I’ve done this for a few rifles. Looks good and seems to last.
Oh, I'll try that next time. I did the same thing as you for the 'applying paint' part, then I used an eraser to remove all the excess material not in the grooves.
This is the paint I got/used:
https://www.amazon.ca/gp/product/B009162PWU/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
https://www.amazon.ca/gp/product/B009162PWU/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Last edited:
DiabeticKripple
CGN Regular
- Location
- Red Deer, Alberta
Well I got my Stag 10 built and out to the range Friday.
Only shot some cheap Remington core lokt 140gr 6.5 creedmoor and some match 140gr Barnes OTM.
Had absolutely 0 FTF or FTE, unlike my BCL 102
Groups were decent, around MOA off a bipod. I know the rifle will do better with ammo it likes or handloads.
My build list is
Upper/Lower Receiver Stag Arms 10
Stock Magpul CTR
Buffer Tube VSeven Weapons Carbine Length
Buffer Spring JP Enterprises SCSS
Castle Nut + Endplate VSeven Weapons Lightweight Combo
Scope Vortex Razor HD LH 3-15x42
Optic Mount. Aero Precision Cantilever
Bolt Carrier Group VSeven Weapons Titanium
Trigger Triggertech Curved, Adjustable
Barrel McGowen 19", 416 Stainless, MHBAR, Fluted, 6.5 Creedmoor
Handguard VSeven Weapons Hyperlight Magnesium 15"
Barrel Nut VSeven Weapons Titanium
Muzzle Device VSeven Weapons Titanium
Gas Block SLR Rifleworks 0.75" Clamp-on, Adjustable
Gas Tube BAD Rifle Length
Charging Handle Radian Weapons AR10 Raptor
Bolt Catch Phase 5
Sling Ferro Concepts Slingster, Coyote Brown
Only shot some cheap Remington core lokt 140gr 6.5 creedmoor and some match 140gr Barnes OTM.
Had absolutely 0 FTF or FTE, unlike my BCL 102
Groups were decent, around MOA off a bipod. I know the rifle will do better with ammo it likes or handloads.
My build list is
Upper/Lower Receiver Stag Arms 10
Stock Magpul CTR
Buffer Tube VSeven Weapons Carbine Length
Buffer Spring JP Enterprises SCSS
Castle Nut + Endplate VSeven Weapons Lightweight Combo
Scope Vortex Razor HD LH 3-15x42
Optic Mount. Aero Precision Cantilever
Bolt Carrier Group VSeven Weapons Titanium
Trigger Triggertech Curved, Adjustable
Barrel McGowen 19", 416 Stainless, MHBAR, Fluted, 6.5 Creedmoor
Handguard VSeven Weapons Hyperlight Magnesium 15"
Barrel Nut VSeven Weapons Titanium
Muzzle Device VSeven Weapons Titanium
Gas Block SLR Rifleworks 0.75" Clamp-on, Adjustable
Gas Tube BAD Rifle Length
Charging Handle Radian Weapons AR10 Raptor
Bolt Catch Phase 5
Sling Ferro Concepts Slingster, Coyote Brown
This is the paint I got/used:
https://www.amazon.ca/gp/product/B009162PWU/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Thank you
nice build DiabeticKripple !!
Is you're JP SCSS the regular weight or the H2 ?
Is you're JP SCSS the regular weight or the H2 ?
Well I got my Stag 10 built and out to the range Friday.
Only shot some cheap Remington core lokt 140gr 6.5 creedmoor and some match 140gr Barnes OTM.
Had absolutely 0 FTF or FTE, unlike my BCL 102
Groups were decent, around MOA off a bipod. I know the rifle will do better with ammo it likes or handloads.
My build list is
Upper/Lower Receiver Stag Arms 10
Stock Magpul CTR
Buffer Tube VSeven Weapons Carbine Length
Buffer Spring JP Enterprises SCSS
Castle Nut + Endplate VSeven Weapons Lightweight Combo
Scope Vortex Razor HD LH 3-15x42
Optic Mount. Aero Precision Cantilever
Bolt Carrier Group VSeven Weapons Titanium
Trigger Triggertech Curved, Adjustable
Barrel McGowen 19", 416 Stainless, MHBAR, Fluted, 6.5 Creedmoor
Handguard VSeven Weapons Hyperlight Magnesium 15"
Barrel Nut VSeven Weapons Titanium
Muzzle Device VSeven Weapons Titanium
Gas Block SLR Rifleworks 0.75" Clamp-on, Adjustable
Gas Tube BAD Rifle Length
Charging Handle Radian Weapons AR10 Raptor
Bolt Catch Phase 5
Sling Ferro Concepts Slingster, Coyote Brown
This is the paint I got/used:
https://www.amazon.ca/gp/product/B009162PWU/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
I use nail polish for the same thing. White and red for iron sights, like on the SKS. White and red for either letters or dots on safeties and switches. Never had a problem but I use nail polish remover or brake cleaner prior to applying.
Last edited:
Sold out
Sweet, sweet Titanium 
Whole rifle now is 5.4lbs, without barrel. I'm still waiting for that faxon 20" pencil!
For anyone unsure, the bolt is steel (9130), as is the firing pin and bolt cam.
Whole rifle now is 5.4lbs, without barrel. I'm still waiting for that faxon 20" pencil!
For anyone unsure, the bolt is steel (9130), as is the firing pin and bolt cam.
Last edited:
Also, I dont know if this strike is affecting how cbsa is handling packages, but I wasn't dinged for taxes when I got my bcg
Dillig offered someone to use his if they paid for the shipping.. not sure which caliber it was for though. If you were in Ottawa, I would have invited you to trade some head for a coffee
